FirewallGuide: Difference between revisions

From Shareaza Wiki
Jump to navigation Jump to search
(changed language template according to mediawikirecovery plan)
(→‎The Shareaza Connection Test (Preferred): corrected connection tests)
Line 14: Line 14:


{{Anchor|ConnectionTest}}
{{Anchor|ConnectionTest}}
==The Shareaza Connection Test (Preferred)==
== The Shareaza Connection Test (Preferred) ==


'''Try this test first!'''  This is the preferred test and it works better than the other tests, since it checks for both, TCP and UDP.  You also need to have Shareaza running and at least trying to connect when taking the test. Here are some hosts for the tests:  
'''Try this test first!'''  This is the preferred test and it works better than the other tests, since it checks for both, TCP and UDP.  You also need to have Shareaza running and at least trying to connect when taking the test. Here are some hosts for the tests:  


[http://jlh.no-ip.org/connectiontest/]
* [http://jlh.no-ip.org/connectiontest/ jlh.no-ip.org/connectiontest/]
[http://home.no.net/tgrumpy/ct/]
* [http://test.atomo64.puffinhost.com/ test.atomo64.puffinhost.com/]
[http://test.atomo64.puffinhost.com/]


If you pass ANY of these test then your router is configured properly. If you fail these tests, you probably have not set up your firewall or port forwarded your router properly, or you are behind an unconfigurable firewall, or your ISP is blocking connections on your Shareaza port (you could try changing the port in the Shareaza settings).
If you pass ANY of these test then your router is configured properly. If you fail these tests, you probably have not set up your firewall or port forwarded your router properly, or you are behind an unconfigurable firewall, or your ISP is blocking connections on your Shareaza port (you could try changing the port in the Shareaza settings).

Revision as of 12:24, 28 November 2009

  Languages:

[[::FirewallGuide|English]] • [[::FirewallGuide/de|Deutsch]] • [[::FirewallGuide/es|Español]] • [[::FirewallGuide/fr|Français]] • [[::FirewallGuide/he|עברית]] • [[::FirewallGuide/it|Italiano]] • [[::FirewallGuide/nl|Nederlands]] • [[::FirewallGuide/pl|Polski]] • [[::FirewallGuide/pt|Português]] • [[::FirewallGuide/ru|Русский]] • [[::FirewallGuide/zh-hant|‪中文(繁體)]]

e

Firewall/Router Configuration

When you have a firewall or router, it blocks traffic to prevent unauthorized access to or from the internet. Some programs, Shareaza included, need to communicate with the internet and the firewall or router may block all or some of these communications unless it is configured.

For more information on configuring your firewall/router, see the Firewalls and Routers section.

Test Shareaza's connectivity through your Firewall or Router

These online tests below try to connect to your Shareaza, and so determine if there is a firewall present. If the test succeeds, then you either don't have a firewall or router, or you have them properly configured. If the test fails, then the firewall or router isn't yet set up properly, or your ISP is somehow blocking the incoming connection attempt.

If you know you have a firewall or a router and didn't configure them yet, then skip this and configure those devices first. Do the test after you think you've set it up properly. Again, read here: Firewalls and Routers.

The Shareaza Connection Test (Preferred)

Try this test first! This is the preferred test and it works better than the other tests, since it checks for both, TCP and UDP. You also need to have Shareaza running and at least trying to connect when taking the test. Here are some hosts for the tests:

If you pass ANY of these test then your router is configured properly. If you fail these tests, you probably have not set up your firewall or port forwarded your router properly, or you are behind an unconfigurable firewall, or your ISP is blocking connections on your Shareaza port (you could try changing the port in the Shareaza settings).


Configuring the Firewall or Router

Help me to configure it - The Firewalls and Routers section of the FAQ can show you how to configure your hardware. If it is not listed there, try asking in the Shareaza Network Config Forum

I can't configure my firewall/router - In Shareaza, go to Tools > Shareaza Settings > Internet > Connection and uncheck "I can accept incoming connections". Often if you are using the internet at college or an office, it will be case that you are behind a firewall that you cannot configure. It might be useful to ask if there are any open ports, or even scan for them (be aware that some institutions have strict policies on internet use). If you find an open port, configure Shareaza to use it by going to Tools > Shareaza Settings > Internet > Connection and entering the port in the port box.

Other Solutions

Still getting LowID, nothing worked? Try this as a last resort:

  1. Change the port Shareaza connects with. Refer to Firewalls and Routers page.
  2. This requiers tweaking the advanced settings. Go to Tools > Shareaza Settings > Advanced and change the value of eDonkey.FastConnect to 0 (False).
  3. As last step, in the advanced options try changing eDonkey.ForceHighID to 1 (True)

Note: The "Shareaza Connection Test" mentioned above is open source and has been released on the Shareaza Forums. If you wish to host a copy of it, you can ask on the shareaza forums. Thank you!


NOTE: this page needs editing. Also, is it necessary to maintain two pages (this one and Firewalls and Routers).