Square wave throughput variation

Discuss Shareaza development as a user.
Forum rules
Home | Wiki | Rules

Square wave throughput variation

Postby blackflag100 » 01 Jan 2011 09:14

What would cause this? It's an ed2k download. I have highID. The same source uploaded several chunks earlier, each steadily at several Kb/s; after each I was bumped back to the end of his queue. This should be the last chunk but instead of downloading at a similar speed to the earlier ones and taking around half an hour, it's downloading at (by my calculations) an average of 130 b/s and will take half a day. Assuming it doesn't bump me before then, which unfortunately seems very likely.

The source is not a push source, in case that's important.
Attachments
square_wave_throughput.gif
square wave throughput
blackflag100
 
Posts: 104
Joined: 07 Nov 2010 20:19

Re: Square wave throughput variation

Postby blackflag100 » 01 Jan 2011 09:59

After about ten minutes of that, the throughput jumped back up to the level seen with previous chunks. I should have the file in another few minutes at the current rate. But I'd still like to know what could have been interfering with the download to cause the earlier odd behavior.
blackflag100
 
Posts: 104
Joined: 07 Nov 2010 20:19

Re: Square wave throughput variation

Postby sshanu » 01 Jan 2011 10:08

Not sure what causes it but I've noticed that over the years also.
Seen it with high & low speed downloads & uploads, with Gnutella, G2 & Torrents, used all at once or individually.
Maybe something to do with how the uploader's client limits available bandwidth, I guess it's possible that source is uploading to many users, each getting a little at a time & what you're seeing is the small amount you get allocated when it's your turn, limited by the other client's upload bandwidth limits & availablity of this bandwidth.
sshanu
 
Posts: 58
Joined: 14 Jun 2009 06:22
Location: Australia

Re: Square wave throughput variation

Postby blackflag100 » 02 Jan 2011 10:12

That would make sense if the same source hadn't eventually made nearly 20x as much bandwidth available to me after a few minutes!
blackflag100
 
Posts: 104
Joined: 07 Nov 2010 20:19

Re: Square wave throughput variation

Postby sshanu » 02 Jan 2011 10:49

Maybe the source cleared a few uploaders in that few minutes, giving you more available bandwidth.
sshanu
 
Posts: 58
Joined: 14 Jun 2009 06:22
Location: Australia

Re: Square wave throughput variation

Postby blackflag100 » 04 Jan 2011 00:37

It would have had to have been more than "a few" -- like, 19/20 of the total number he had had.
blackflag100
 
Posts: 104
Joined: 07 Nov 2010 20:19

Re: Square wave throughput variation

Postby old_death » 04 Jan 2011 14:59

In any way we can't tell what the other party did as if it is an eD2k transfer, the other client is most probably not Shareaza - and therefore we cannot influence its actions...
User avatar
old_death
 
Posts: 1950
Joined: 13 Jun 2009 16:19


Return to Bugs, Tasks, and Features Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron