connection issues

[captain008]

I am running Shareaza 2.5.1.0 and the connection test gives following message.

Details

Data dump: v1.12,to=5,ipf=no,ip=XX.XXX.XX.XX,proxy=,port=6346,lang=de,el=0,php=5.2.6-1+lenny4
host=atdot.ch,path=/connectiontest/index.php,t=2009-12-18T15:09:42Z

Start connection test for TCP...
Get socket.
Attempt to connect to 86.208.137.38 on port 6346.
socket_connect() failed, error 113: No route to host.
Close socket.
Done, return code: 'ERROR'.

Start connection test for UDP...
Get socket.
Attempt to bind to INADDR_ANY on any port.
Send /JCT: 3x12 bytes: GND\002sq\001\001\020JCT
Read response:
86.208.137.38:6346 sent 8 byte(s): GND\000sq\001\000 <- OK: packet accepted
Close socket.
Done, return code: 'ANSWERED'.

Static IP is assigned, ports are opened in the router ....
... and I am running out of ideas.

Can someone help?
Thanks

[ocexyz]

1st do not show your IP in above post, edit it.

Have you opened firewall for Shareaza? It was not mentioned above, \Router is not enough.

[captain008]

1st OK
2nd Yes, shareaza opens the firewall when installing. I checked, it is open. UDP is fine, TCP doesn't work. I am running Vista32 and should be notified if something gets blocked.

[old_death]

Have you configured your firewall/router correctly?
https://sourceforge.net/apps/mediawiki/ ... llsRouters

[captain008]

Yes.
I am using Shareaza since many years and never had troubles to get a proper connection.
Windows firewall ports are opened during installation. I have asssigned a static IP. Ports are opened in my router.
UDP test is successful. Only TCP doesn't work.

[captain008]

Problem solved.
Indeed it was a problem with the router.
Thanks for your help!

[old_death]

[captain008]

Sure, but didn't really understand why it works now.
My router is INVENTEL LIVE BOX 2F50. I removed the open ports and reinstalled them. Didn't change any setting. Now it works ....
IT is like magic ....

[ocexyz]