Help Need configuring Superhub

[igotastaff]

Hi all , I am a newbie to the forum so please bear with me..
I have been happily using Shareaza for many years , but recently changed to the Virgin super hub.Now I cannot configure the ports to the hub..
I have used the port forwarding software and my default ports are blocked (6346) and it recommended changing to a higher number of port. My IP address is static .
I logged onto the hub admin and tried to enter the port forwarding details but i couldn't enter the static ip address.this was due to the hub only letting me change the last digit.
the hub was saying 192.167.0.____
I needed to enter 192.167.1.150

I cannot change the 0 to a 1 any ideas ????

Shareaza is not usable and I do not know how to get around this problem, any help greatly apreciated

[old_death]

Well, then maybe you should simply change the address of your PC to match the range you can use on your Hub...

[cyko_01]

have you already tried enabling UPNP in shareaza and seeing if that works before manually doing port forwarding?

[raspopov]

I have ADSL modem (TREDNet) which wont configure any IP address except from built-in DHCP-server IP ranges even if DHCP-server was disabled. So... 1) Turn DHCP on; 2) Select 192.168.1.0-192.168.1.255 range; 2) Turn DHCP off; 3) Configure static IP.