GWC: Difference between revisions

From Shareaza Wiki
Jump to navigation Jump to search
(changed language template according to mediawikirecovery plan)
 
(12 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{Language}}
{{Languages}}


<Start of recovered content from sabotaged pp.net. It need to be verified and updated if needed. If there was any backuped content aviable it will be bellow recovered content for verification purposes. Please do not remove parts about older system versions, they are needed for many users, but add info about newer and mark them as such. This info should be removed after that verification and update, but only when this page in this language version will be actual and ready to use.>
== Gnutella Web Cache ==
A '''Gnutella Web Cache''' (often referred to as '''GWC''') is a web service that gives computers connecting to [[Gnutella2|G2]], [[gnutella]] or similar [[P2P network]]s IPs to connect to if they do connect for the first time or do not know IPs to connect to for some other reason. This means GWCs (and similar services) are essential for the initial network connection. However, UHCs (on gnutella) and UKHLs (on G2) are more and more taking over the services once performed by GWCs.


'''<This iste is not fully recovered yet, under recovery still>'''
== How you can help ==
If you have a dedicated server and can spare some extra bandwidth then please consider running a GWC. People that don't have a dedicated server or are on normal broadband consumer lines should not run a cache from home.


==Gnutella Web Cache==
== See also ==
 
* [[GWC specs]]
 
* [[Host Cache]]
Gnutella requires Gnutella Web Caches (GWC) to get IPs to establish a connection to the network. These are critical to ensuring the health of the network. If you have a dedicated server and can spare some extra bandwidth then please consider running a GWC. People that don't have a dedicated server or are on normal broadband consumer lines should not run a cache from home.
 
A GWC is a simple script that can be put on any webserver that supports one of the following scripting languages:
 
*JSP (Java Servlet)
**[http://www1.mager.org/GWebCache/ Jums Web Cache] (Excellent for heavy loads)
*C
**[http://wiki.limewire.org/index.php?title=GhostWhiteCrab GhostWhiteCrab] (For dedicated server environments and people who know how to compile C source code!)
*ASP
**[http://www.edazzle.net/downloads/gerry.zip Gerry GWC]  
**[https://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=7846&lngWId=4 Lynn (v.s. 0.5)]
**[https://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=7731&lngWId=4 Lynn (v.s. 0.4)]
**[http://www.poundwebhosting.com/cgi-bin/lynnx.asp LynnX]  
*Perl
**[http://www.jonatkins.com/perlgcache/ Jon Atkins' perlgcache]
**The original [http://www.gnucleus.com/gwebcache/dist/ GnuWebCache]
'''PHP''' ''(Tip: PHP GWCs are usually the easiest to run and setup on a server.)''
**[http://gwcii.sourceforge.net/ PHPGnuCacheII]
**[http://www.bazookanetworks.com/ Bazooka G2WC]
*The original [http://www.gnucleus.com/gwebcache/dist/ GnuWebCache] ''(PHP version is no longer supported)''
**[http://sourceforge.net/projects/skulls/ Skulls! Multi-Network WebCache]
**[http://sourceforge.net/projects/beaconcache/ Beacon Cache]
**[http://code.google.com/p/cachechu/ Cachechu G2WC]
 
 
==Breakdown Of The Gnutella Web Caches:==
 
<comment: Bellow is content of tabel, but sb is needed to set it properly. Sorry. There is full content>
 
Cache:
Gnutella:
Gnutella2:
Spec 1:
Spec 2:
Flat-File:
SQL:
Installer:
Other Networks:
Different network instances:
Beacon Cache (Core 2)
Yes
Yes
Yes
Yes
Yes
Yes (As of 0.2.0 Alpha)
Yes
Yes
Yes
Beacon Cache (Core 1)
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Skulls
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
JumsWebCache
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
GnuWebCache (Perl)
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
GnuWebCache (PHP)
Yes
No
Yes
No
Yes
No
No
No
No
GhostWhiteCrab(GWC)
Yes
Yes
Yes
Yes
N/A
Yes
No
PHPGnuCacheII
Yes
Yes
Yes
Yes
No
Yes
No
No
Yes
Bazooka
No
Yes
No
Yes
Yes
No
Yes
No
No
Cachechu
No
Yes
No
Yes
Yes
No
No
No
No
Perlgcache
Yes
No
Yes
Yes
Yes
No
No
No
No
Gerry GWC (v2)
Yes
No
No
Yes
Yes
No
No
No
No
Gerry GWC (v1)
Yes
No
Yes
No
Yes
No
No
No
No
Lynn
Yes
No
Yes
No
Yes
No
No
No
No
LynnX
Yes
No
No
Yes
Yes
No
No
No
No
 
<End of table content>
 
==Shareaza Specific Details==
 
* Get String Breakdown:
          o Update a leaf
                + "?update=1&ip=(ip):(port)&x_leaves=(leaf count)
          o Ping Variable
                + Appends &ping=1 to identify the cache name in debug messages (for gnutella and gnutella2 in 2.4.0.0, but only for gnutella2 now in 2.4.0.X for spec1 cache compatibility).
                + This feature new to Shareaza.
          o Network Variable
                + Appends &net=gnutella2 on Gnutella2 queries.
                + Does NOT append a network variable on Gnutella(1) queries.
          o Client Name / Version Format (2.4.0.0 and earlier):
                + &client=(Shareaza 4 letter code (RAZA / RAZB) )
                + &version=(Shareaza's version)
          o Client Name / Version Format (2.4.0.X):
                + If Gnutella
                      # &client=(Shareaza 4 letter code (RAZA / RAZB) )
                      # &version=(Shareaza's version)
                + If Gnutella2
                      # &client=(Shareaza 4 letter code (RAZA / RAZB) )+(Shareaza's version)
 
 
 
* GWC Response Matching:
          o i|
                + Informational output alone will not be taken as GWC 'success.'
          o i|access|period|(time in sec.)
                + Time in seconds before Shareaza is allowed to make a request to the cache.
          o i|update|period|(time in sec.)
                + Time in seconds before Shareaza is allowed to update to the cache.
          o i|force|remove and i|update|warning|bad url
                + Remove the GWC from the internal list.
          o Some Response Matches (added in 2.3.1.X)
                + i|NO-URL-NO-HOSTS
                      # Outputs warning of the cache being totally empty to the system log.
                + i|NO-URL
                      # Outputs warning of the cache having no alternative URLs to the system log.
                + i|NO-HOSTS
                      # Outputs warning of the cache having no hosts to the system log.
                + i|warning|
                      # Outputs warning of the cache to the system log.
                + ERROR Something Failed
                      # Outputs warning of the cache to the system log(Buggy Bazooka GWCs workaround).
                + i|warning|You came back too early (2.3.1.X)
                + i|warning|client|early (2.3.1.X)
                + WARNING: You came back too early (2.3.1.X)
                + ERROR: Client returned too early (2.3.1.X)
                      # Flood detection for the update side.
                      # Outputs GWebCache(update) Too many connection attempts to the system log.
                + too early (2.3.1.X)
                + early (2.4.0.X)
                      # Flood detection for the request side.
                      # Outputs GWebCache URL: Too many connection attempts to the system log.
                + i|update|OK
                      # Outputs "GWebCache(v2) Update Passed: " to the system log.
                + OK
                      # Outputs "GWebCache(v1) Update Passed: " to the system log.
 
 
 
* GWC Response Matching:
          o i|
                + Informational output alone will not be taken as GWC 'success.'
          o i|access|period|(time in sec.)
                + Time in seconds before Shareaza is allowed to make a request to the cache.
          o i|update|period|(time in sec.)
                + Time in seconds before Shareaza is allowed to update to the cache.
          o i|force|remove and i|update|warning|bad url
                + Remove the GWC from the internal list.
          o Some Response Matches (added in 2.3.1.X)
                + i|NO-URL-NO-HOSTS
                      # Outputs warning of the cache being totally empty to the system log.
                + i|NO-URL
                      # Outputs warning of the cache having no alternative URLs to the system log.
                + i|NO-HOSTS
                      # Outputs warning of the cache having no hosts to the system log.
                + i|warning|
                      # Outputs warning of the cache to the system log.
                + ERROR Something Failed
                      # Outputs warning of the cache to the system log(Buggy Bazooka GWCs workaround).
                + i|warning|You came back too early (2.3.1.X)
                + i|warning|client|early (2.3.1.X)
                + WARNING: You came back too early (2.3.1.X)
                + ERROR: Client returned too early (2.3.1.X)
                      # Flood detection for the update side.
                      # Outputs GWebCache(update) Too many connection attempts to the system log.
                + too early (2.3.1.X)
                + early (2.4.0.X)
                      # Flood detection for the request side.
                      # Outputs GWebCache URL: Too many connection attempts to the system log.
                + i|update|OK
                      # Outputs "GWebCache(v2) Update Passed: " to the system log.
                + OK
                      # Outputs "GWebCache(v1) Update Passed: " to the system log.
 
 
 
==Gnutella Web Cache Specifications==
<end of partial recovery by OCE>
 
 
 
 
<end of recovered content>
 
<row recovery, start>
Specification 1:
 
    * Networks Served
          o Gnutella
    * Format
          o Update went fine:
                + Ex: OK
          o Update Warning (Small prob., not that bad):
                + Ex:
 
OK
WARNING: Error Message
 
    * Severe Warning (No 'OK' message sent)
          o Ex:
 
WARNING: Error Message
 
    * URL Output:
          o Ex: http://somefreakinrandomcache.com/cache/gcache.php
                + OR - WITH A PORT NUMBER (If not 80)
                      # Ex: http://somefreakinrandomcache.com:8080/cache/gcache.php
    * Host Output:
          o Ex: 66.132.55.12:6346
    * Pong (ping variable response) - was explained below under the topic: variables.
    * Example Cache Output (Beacon Cache) For urlfile Command
          o Example "urlfile Output" URL: Ex: http://grantgalitz.com/Beacon/gwc.php?ping=1&client=RAZA&version=2.3.1.3&urlfile=1
                + Example URL Output:
 
 
Getting urls with a pong combined
 
PONG Beacon Cache 0.1.5D Beta
http://gwc.frodoslair.net/skulls/skulls.php
http://bbs.robertwoolley.co.uk/GWebCache/gcache.php
http://g2.tjtech.org/g2/
http://g2.tjtech.org/g2/index.php
http://gwc.monnsta.net/
http://holograph.uni.cc/other/skulls.php
http://gwc.nickstallman.net/
http://gwc.eod.cc/skulls.php
http://gwc.frodoslair.net/skulls/skulls
http://gwc.werwin.net/skulls.php
 
 
    * Example Cache Output (Beacon Cache) For hostfile Command
          o Example "hostfile Output" URL: Ex: http://grantgalitz.com/Beacon/gwc.php?ping=1&client=RAZA&version=2.3.1.3&hostfile=1
                + Example Host Output:
 
 
Getting the hosts with a pong combined
 
PONG Beacon Cache 0.1.5D Beta
71.8.84.153:3915
99.248.214.157:27529
69.60.241.55:16369
193.253.239.246:30218
68.156.175.121:6348
71.179.7.241:18344
74.196.22.241:6348
12.210.197.194:10531
222.150.143.77:10000
58.85.231.135:6346
24.141.199.164:20205
72.175.201.195:6348
69.81.129.228:4880
97.81.221.63:13219
70.15.130.224:7759
216.211.188.106:51903
75.167.168.156:48660
12.214.14.3:35916
76.177.244.106:24180
98.165.218.139:39630
68.112.182.125:3685
68.117.204.57:23482
65.12.154.25:40760
69.180.47.169:5711
75.138.40.173:24987
98.201.19.0:33662
70.187.2.144:6348
68.186.209.107:14429
69.159.7.61:6348
76.208.176.196:48199
 
 
    * For combining a hostfile and urlfile request:
          o Warning: This is non-standard.
          o Example Cache Output (Beacon Cache) For bfile Command
                + Example "bfile Output" URL: Ex: http://grantgalitz.com/Beacon/gwc.php?ping=1&client=RAZA&version=2.3.1.3&bfile=1
                      # Example Host and URL Output:
 
 
Getting the hosts and urls with a pong combined
 
PONG Beacon Cache 0.1.5D Beta
71.8.84.153:3915
99.248.214.157:27529
69.60.241.55:16369
193.253.239.246:30218
68.156.175.121:6348
71.179.7.241:18344
74.196.22.241:6348
12.210.197.194:10531
222.150.143.77:10000
58.85.231.135:6346
24.141.199.164:20205
72.175.201.195:6348
69.81.129.228:4880
97.81.221.63:13219
70.15.130.224:7759
216.211.188.106:51903
75.167.168.156:48660
12.214.14.3:35916
76.177.244.106:24180
98.165.218.139:39630
68.112.182.125:3685
68.117.204.57:23482
65.12.154.25:40760
69.180.47.169:5711
75.138.40.173:24987
98.201.19.0:33662
70.187.2.144:6348
68.186.209.107:14429
69.159.7.61:6348
76.208.176.196:48199
http://gwc.frodoslair.net/skulls/skulls.php
http://bbs.robertwoolley.co.uk/GWebCache/gcache.php
http://g2.tjtech.org/g2/
http://g2.tjtech.org/g2/index.php
http://gwc.monnsta.net/
http://holograph.uni.cc/other/skulls.php
http://gwc.nickstallman.net/
http://gwc.eod.cc/skulls.php
http://gwc.frodoslair.net/skulls/skulls
http://gwc.werwin.net/skulls.php
 
 
    * Variables
          o Mandatory
                + ping:
                      # Response should have this always: PONG
                      # After, put the cache's name. ex: PONG fakecache 0.01
                + client:
                      # Four letter code of the client. ex: RAZA
                + version:
                      # Version number of the client.
                + urlfile:
                      # Used by the client to request alternate cache urls.
                + hostfile:
                      # Used by the client to request IPs with port numbers attached.
                + url:
                      # Client update giving an alternate cache URL.
                      # Formatted with a http:// prefix to each cache.
                + ip:
                      # Client update giving one's IP to submit.
                + url1:
                      # OLD OUTDATED Client update giving an alternate cache URL.
                      # Formatted with a http:// prefix to each cache.
                + ip1:
                      # OLD OUTDATED Client update giving one's IP to submit.
          o Optional
                + bfile:
                      # For clients to request both URLs and IPs from the cache at the same time.
                + statfile:
                      # Statistics of the cache request:
                            * First line: Total requests of the cache number.
                            * Second line: Requests of the cache an hour number.
                            * Third line: Updates of the cache an hour number.
 
Specification 2:
 
    * Networks Served
          o Gnutella, Gnutella2, etc.
    * Format
          o Information Output
                + Starts with: I|
                      # Categories
                            * Pong (ping variable response) - Described below under the topic: variables.
                            * Update Status Response
                                  o Format: I|update
                                  o Responses
                                        + I|update|OK
                                              # - Everything went fine.
                                        + I|update|OK|WARNING
                                              # Small warning.
                                        + I|update|WARNING
                                              # Severe warning
                            * Plain Warnings
                                  o Format: I|WARNING
                                        + Append any warning messages after it - Ex: I|WARNING|You came back too early
                            * Extra Info - Described below under the topic: variables.
          o Host Output
                + Starts with: H|
                + Add the IP with its port:
                      # Ex: H|0.0.0.0:6346
                + Add the time, thereafter, of the host's (In seconds*) time in cache:
                      # Ex: H|0.0.0.0:6346|45
                + If cluster exists with cluster=somerandomwords
                      # Add the clustered words after the host's age:
                            * Ex: H|0.0.0.0:6346|45|somerandomwords
          o URL Output
                + Starts with: U|
                + Add the URL with http:// before it, plus the port (if it's not 80).
                      # Ex: U|http://somerandomcache.com/
                + Add the time, thereafter, of the URL's time (In seconds*) in cache:
                      # Ex: U|http://somerandomcache.com/|45
          o Example Cache Output (Beacon Cache) For get Command
                + Example URL: http://grantgalitz.com/Beacon/gwc.php?get=1&client=RAZA&version=2.3.1.3&net=gnutella2&ping=1
                      # Example "Get" Output:
 
 
Getting the hosts and urls with a pong combined
 
I|pong|Beacon Cache 0.1.5D Beta|gnutella-gnutella2
H|65.9.200.243:4968|248261
H|68.228.129.75:44599|242678
H|98.240.196.122:8206|240719
H|76.104.12.133:14921|218273
H|69.136.1.12:3924|211610
H|81.154.208.71:8595|174402
H|97.96.105.51:2076|153610
H|74.192.153.212:39340|144203
H|72.190.106.57:12584|132984
H|78.93.71.132:12334|125668
H|82.43.248.184:27560|97974
H|196.205.224.97:6357|86763
H|74.129.219.30:33172|82005
H|76.104.12.133:19185|57182
H|69.59.83.131:18442|38628
U|http://www.k33bz.com/g2/bazooka.php|248639
U|http://gwebcache.ns1.net/|248592
U|http://gwc2.wodi.org/skulls.php|248384
U|http://gwc.guufshop.com/skulls/skulls.php|248322
U|http://groovy.syxy.com/up/skulls.php|248300
U|http://g2.tjtech.org/g2/index.php|247770
U|http://midian.jayl.de/g2/bazooka.php|240719
U|http://www.dom2porno.info/skulls/skulls.php|207473
U|http://gwc.frodoslair.net/skulls/skulls|125668
U|http://holograph.uni.cc/other/skulls.php|9642
 
 
    * Variables
          o Mandatory
                + ping:
                      # Main Part: I|pong|
                      # Then add the cache name and version: I|pong|fakecache 0.01
                      # Then lastly add the network support:
                            * I|pong|fakecache 0.01|gnutella
                                  o - Gnutella only
                            * I|pong|fakecache 0.01|gnutella2
                                  o - Gnutella2 only
                            * I|pong|fakecache 0.01|gnutella-gnutella2
                                  o - Gnutella and Gnutella2 served
                + get:
                      # Used by clients to requests alternate cache URLs along with IPs and their port numbers.
                + update:
                      # url:
                            * Client update giving an alternate cache URL.
                            * Formatted with a http:// prefix to each cache.
                      # ip:
                            * Client update giving one's IP to submit.
                + net:
                      # Which network to serve the client.
                            * Gnutella
                                  o Ex: net=gnutella
                            * Gnutella2
                                  o Ex: net=gnutella2
                            * Should always be lowercase
                                  o GWCs should automatically convert network name given to lowercase to prevent Net ID mismatches
 
solely on case alone.
 
    *
          o
                + client:
                      # Four letter code of the client. ex: RAZA
                + version:
                      # Version number of the client.
          o Optional
                + cluster:
                      # To add extra info to an IP update.
                            * Output by cache: H|0.0.0.0|AGE OF HOST (Seconds)|clustering some bull****
                + statfile:
                      # Exactly like the specification 1 statfile (Same routine and output style).
                      # Statistics of the cache request:
                            * First line: Total requests of the cache number.
                            * Second line: Requests of the cache an hour number.
                            * Third line: Updates of the cache an hour number.
 
Specification 2.1
 
    * This is an extension of specification 2, not a separate specification!
    * Pong extension
          o Append the networks supported joined by a hyphen '-'.
          o Used for client-side validation of networks supported and for network support reporting to other web caches.
          o Format:
                + I|pong|cache name|network names joined by '-'
                + Format Examples:
                      # I|pong|fakecache 0.01|gnutella
                            * - Gnutella only
                      # I|pong|fakecache 0.01|gnutella2
                            * - Gnutella2 only
                      # I|pong|fakecache 0.01|gnutella-gnutella2
                            * - Gnutella and Gnutella2 served
    * Host Output
          o Just like specification 2, but with more fields supported for host output.
                + H|ip:port|age in cache|clustering|leaves|4 letter vendor code|reported uptime of host|max. leaves possible
                      # The host, age, and clustering fields are all still the same as in specification 2.
                      # The leaf count of the hub reported is in the 5th field.
                      # The vendor code with version number is in the 6th field.
    * Request Control Variables:
          o getleaves
                + Used to obtain leaf counts of hubs given
                + 4th field ultilized for current leaf count.
                + 7th field ultilized for maximum leaf slots possible.
                + Use this as 'getleaves=1' or 'getleaves' to enable.
          o getclusters
                + Enables/Disables clustering.
                + Use this as 'getclusters=1'.
                + Using 'getclusters' or 'getclusters=0' disables cluster output.
          o getvendors
                + Used to obtain the vendor code w/ version number of the hubs given.
                + Found in the 5th field.
                + Use this as 'getvendors=1' or 'getvendors' to enable.
          o getuptime
                + Used to obtain the vendor code w/ version number of the hubs given.
                + Value is static, do not change the value given when time passes.
                + Found in the 6th field.
                + Use this as 'getuptime=1' or 'getuptime' to enable.
          o spec
                + To force the specification parameter
                + Currently is only supported by Beacon Cache II
          o pv
                + Similar to the 'spec' parameter, except that it does not force, instead it simply negotiates the specification.
    * Special Data Requests
          o info
                + Outputs extra details of your cache.
                      # Start with the informational response: I|
                            * Ex: I|open-source|1
          o support
                + Outputs USEFUL details of your cache.
                      # Start with the informational response: I|
                            * Ex: I|support|gnutella2
          o getnetworks
                + Outputs the enabled networks in two formats.
                      # Start with the informational response: I|
                            * For the 'I|nets|' line
                                  o The third field contains the supported networks joined by '-'.
                            * For the 'I|networks|' line
                                  o Interpret the fields from 3 and beyond as individual network names to challenge against.
                      # Examples
                            *
                                  o I|net|gnutella-gnutella2
                                  o I|networks|gnutella|gnutella2
    * Update Extension Variables:
          o x_leaves
                + Number of leaves running on a given hub or ultrapeer.
                + Value must not be greater than an integer value of 2047.
          o x_max
                + Maximum number of leaves possible on a given hub or ultrapeer.
                + Value must not be greater than an integer value of 2047.
          o uptime
                + Value submitted must be an integer value of the number of seconds of uptime.
                + Value must not be greater than an integer value of 1 year (31536000) and less than 1 hour (60).
 
Pinging Caches With Your Cache
 
    * Please follow this standard:
          o Client: TEST
          o Version: Your Cache's Name
                + The old value for "version" was 1
    * Some variables to attach to the ping (compatibility):
          o multi
                + Used by some gwcs in their pings to other gwcs.
                + It tells the pinged cache to ignore the "net" parameter (so it should never say network not supported) and outputting the pong using this format, if possible, "I|pong|[cache name] [cache version]|[supported networks list]|[url adding is enabled]" - example: I|pong|Skulls 0.2.8a|gnutella-gnutella2|1
                + Used by Skulls GWC only.
          o cache
                + This is added to every request made by some gwcs, it is for statistical purposes only.
                + It simply tells the remote cache that the client is a GWC.
    * Help
          o For PHP
                + Use the fsockopen() function to open a connection to a cache.
                      # Make sure you "write" to the fsockopen carry value to open the GWC's target file.
                            * http://us.php.net/manual/en/function.fsockopen.php
 
Variable Combination Standards
 
    * Net variable decides specification!
          o There are many ways to determine spec., but going with net is the safe way.
          o Skulls GWC does not use the network parameter to determine specification level.
          o Beacon Cache (I and II) uses the network parameter to determine the specification level.
    * Your cache needs to be able to process certain combinations of variables.
          o Update variable
                + Update should not fail if absent if spec. 2.
                      # A Specification 2 parameter.
    * Spec 1 parameters used in Spec 2:
          o Should still accept hostfile and urlfile responses for spec. 2.
                + Beacon Cache (I and II) accepts these parameters on spec 2.
    * The 'spec' paameter can be used to force a specification:
          o Only known to exist in Beacon Cache II, it can force the request to be handled as a specification 1 or 2 request.
          o Spec 1 = 'spec=1'
          o Spec 2 = 'spec=2'
          o If 'spec' is not equal to any current spec, then default to the predetermined spec.
    * Multiple variable requests
          o If for instance a ping and request exist, you should always handle them properly.
                + Same goes with other combos like an update and ping, statfile + ping and info.
          o Handle multiple variables as BEST as possible!
                + Some scanners and GWCs like to fit all their requests into one URL send.
 
<row recovery, end>
 
Further Information:
 
* [http://www.gnucleus.com/gwebcache/ Original GWC site]
** [http://gnucleus.sourceforge.net/gwebcache/specs.html GWC Spec. 1]
** [http://gnucleus.sourceforge.net/gwebcache/newgwc.html GWC Spec. 2]
 
 
 
 
 
<content recovered from last aviable backup>
 
===Gnutella Web Cache===
Gnutella requires Gnutella Web Caches (GWC) to get IPs to establish a connection to the network.  These are critical to ensuring the health of the network.  If you have a dedicated server and can spare some extra bandwidth then please consider running a GWC.  People that don't have a dedicated server or are on normal broadband consumer lines should not run a cache from home.
 
A GWC is a simple script that can be put on any webserver that supports one of the following scripting languages:
*JSP (Java Servlet)
**[http://web.archive.org/web/20061108091447/http://www.mager.org/GWebCache/ Java Servlet GWebCache Application (Archive.org)]
*C
**[http://ghostwhitecrab.com/crab/ GhostWhiteCrab]
*Perl
**[http://www.jonatkins.com/perlgcache/ Jon Atkins' perlgcache]
**The original [http://www.gnucleus.com/gwebcache/dist/ GnuWebCache]
*PHP
**[http://gwcii.sourceforge.net/ PHPGnuCacheII] - MySQL
**[http://www.bazookanetworks.com Bazooka G2WC] (recommended) - flat files
**[http://sourceforge.net/projects/skulls/ Skulls! Multi-Network WebCache] - flat files
====Further Information:====
*[http://www.gnucleus.com/gwebcache/|Original GWC site]

Latest revision as of 17:08, 2 February 2014

  Languages:

[[::GWC|English]] • [[::GWC/de|Deutsch]] • [[::GWC/es|Español]] • [[::GWC/fr|Français]] • [[::GWC/he|עברית]] • [[::GWC/it|Italiano]] • [[::GWC/nl|Nederlands]] • [[::GWC/pl|Polski]] • [[::GWC/pt|Português]] • [[::GWC/ru|Русский]] • [[::GWC/zh-hant|‪中文(繁體)]]

e

Gnutella Web Cache

A Gnutella Web Cache (often referred to as GWC) is a web service that gives computers connecting to G2, gnutella or similar P2P networks IPs to connect to if they do connect for the first time or do not know IPs to connect to for some other reason. This means GWCs (and similar services) are essential for the initial network connection. However, UHCs (on gnutella) and UKHLs (on G2) are more and more taking over the services once performed by GWCs.

How you can help

If you have a dedicated server and can spare some extra bandwidth then please consider running a GWC. People that don't have a dedicated server or are on normal broadband consumer lines should not run a cache from home.

See also

Retrieved from "https://shareaza.sourceforge.net/w/index.php?title=GWC&oldid=9861"