Shareaza Not Loading

Get answers to your Shareaza related problems.
Forum rules
Home | Wiki | Rules

Shareaza Not Loading

Postby julianekg » 20 Dec 2013 05:31

I was running Shareaza debug build 2.6. Got a notice that 2.7 was available. So I downloaded and uninstalled the debug build before installation the new one. After installation, the new version would not load. Uninstalled that and reinstalled the debug build. Now that one doesn't load either. I'm at a loss. If anyone has any ideas on how to resolve it would be greatly appreciated. Also, I'm running Windows 7 Ultimate with all updates done and Norton with an exception loaded for Shareaza.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby raspopov » 20 Dec 2013 14:43

Does any error dialogs shown on the screen?
User avatar
raspopov
Project Admin
 
Posts: 945
Joined: 13 Jun 2009 12:30

Re: Shareaza Not Loading

Postby julianekg » 20 Dec 2013 15:06

No errors show. It doesn't even show splash screen. Like its not installed or not seeing the program. Wondering if it an issue with the Visual C+ that it "updates" during the install? All other programs on my system are working fine.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby raspopov » 20 Dec 2013 15:42

I doubt it's a Visual C++ DLL issue, since old debug build can't run also... But to confirm that you can install those DLLs manually: for 32-bit and for 64-bit Shareazas.
User avatar
raspopov
Project Admin
 
Posts: 945
Joined: 13 Jun 2009 12:30

Re: Shareaza Not Loading

Postby julianekg » 21 Dec 2013 03:34

Ok. Tried that. Didn't help. Love to get this fixed. Have used Shareaza for years. When I click on the shareaza desktop icon, I get the little circle loading thing for about 5 seconds and then it disappears. Not listed in running programs either.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby julianekg » 21 Dec 2013 05:37

Ok. I downloaded an uninstaller from the web and did an advanced uninstall to completely remove shareaza. After that I went and deleted the program file for shareaza. Reinstalled the build I had previously as administrator and it worked. Tried to update with the 2.7 and had the same problem again so I repeated steps and its running with the 2.6. Not sure what is causing the problem but will check back to see if there are any updates.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby raspopov » 21 Dec 2013 06:53

User avatar
raspopov
Project Admin
 
Posts: 945
Joined: 13 Jun 2009 12:30

Re: Shareaza Not Loading

Postby julianekg » 21 Dec 2013 15:13

Yes. I did try that in order to get 2.7 to work. Still did solve the problem. I do have an older pc that I have upgraded components. Thinking maybe it could just be getting really glitchy. As long as I can use the 2.6 I'm good. will still try to see if I can come up with anything as to why the 2.7 won't run. If I find anything relevant, I will definitely post it.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby julianekg » 29 Dec 2013 20:52

I did have to do a reinstall of my os cuz getting some other issues going on. So installed 2.7 still not working. And this install was on a clean system. So not sure what is going on with it. Reinstalled the debug version 2.6. All works fine with that.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby raspopov » 30 Dec 2013 04:11

Can you use utility "Dependency Walker" (depends.exe) from Visual Studio, run Shareaza 2.7 using it and sending its log to me?
User avatar
raspopov
Project Admin
 
Posts: 945
Joined: 13 Jun 2009 12:30

Re: Shareaza Not Loading

Postby julianekg » 31 Dec 2013 19:12

I attached the log file in pdf form. Hope I did it correctly.
Shareaza.pdf
(93.99 KiB) Downloaded 600 times
If you get any results from that let me know. Would really love to get the new build up and running on this system.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby raspopov » 31 Dec 2013 19:55

User avatar
raspopov
Project Admin
 
Posts: 945
Joined: 13 Jun 2009 12:30

Re: Shareaza Not Loading

Postby julianekg » 01 Jan 2014 02:54

Warning: At least one delay-load dependency module was not found.
Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module.

--------------------------------------------------------------------------------
Starting profile on 12/31/2013 at 7:54:25 PM

Operating System: Microsoft Windows NT/2000/XP/2003/Vista based Ultimate (32-bit), version 6.01.7601 Service Pack 1
Program Executable: c:\program files\shareaza\SHAREAZA.EXE
Program Arguments:
Starting Directory: C:\Program Files\Shareaza\
Search Path: C:\Program Files\Shareaza;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Common Files\Roxio Shared\DLLShared\

Options Selected:
Simulate ShellExecute by inserting any App Paths directories into the PATH environment variable.
Log DllMain calls for process attach and process detach messages.
Hook the process to gather more detailed dependency information.
Log LoadLibrary function calls.
Log GetProcAddress function calls.
Log debug output messages.
Automatically open and profile child processes.
--------------------------------------------------------------------------------

Started "SHAREAZA.EXE" (process 0x106C) at address 0x01350000. Successfully hooked module.
Loaded "NTDLL.DLL" at address 0x77860000. Successfully hooked module.
Loaded "KERNEL32.DLL" at address 0x76F00000. Successfully hooked module.
Loaded "KERNELBASE.DLL" at address 0x75940000. Successfully hooked module.
DllMain(0x75940000, DLL_PROCESS_ATTACH, 0x00000000) in "KERNELBASE.DLL" called.
DllMain(0x75940000, DLL_PROCESS_ATTACH, 0x00000000) in "KERNELBASE.DLL" returned 1 (0x1).
DllMain(0x76F00000, DLL_PROCESS_ATTACH, 0x00000000) in "KERNEL32.DLL" called.
DllMain(0x76F00000, DLL_PROCESS_ATTACH, 0x00000000) in "KERNEL32.DLL" returned 1 (0x1).
Injected "DEPENDS.DLL" at address 0x08370000.
DllMain(0x08370000, DLL_PROCESS_ATTACH, 0x00000000) in "DEPENDS.DLL" called.
DllMain(0x08370000, DLL_PROCESS_ATTACH, 0x00000000) in "DEPENDS.DLL" returned 1 (0x1).
Loaded "BZLIB.DLL" at address 0x747D0000. Successfully hooked module.
Loaded "MSVCR100.DLL" at address 0x636E0000. Successfully hooked module.
Loaded "REGEXP.DLL" at address 0x6C2B0000. Successfully hooked module.
Loaded "MSVCP100.DLL" at address 0x69ED0000. Successfully hooked module.
Loaded "BUGTRAP.DLL" at address 0x727E0000. Successfully hooked module.
Loaded "USER32.DLL" at address 0x76E30000. Successfully hooked module.
Loaded "GDI32.DLL" at address 0x77A40000. Successfully hooked module.
Loaded "LPK.DLL" at address 0x779E0000. Successfully hooked module.
Loaded "USP10.DLL" at address 0x75CE0000. Successfully hooked module.
Loaded "MSVCRT.DLL" at address 0x75D80000. Successfully hooked module.
Loaded "ZLIBWAPI.DLL" at address 0x6C290000. Successfully hooked module.
Loaded "HASHLIB.DLL" at address 0x73E50000. Successfully hooked module.
Loaded "SQLITE3.DLL" at address 0x691B0000. Successfully hooked module.
Loaded "MFC100U.DLL" at address 0x5C850000. Successfully hooked module.
Loaded "SHLWAPI.DLL" at address 0x76130000. Successfully hooked module.
Loaded "COMCTL32.DLL" at address 0x747F0000. Successfully hooked module.
Loaded "MSIMG32.DLL" at address 0x6D220000. Successfully hooked module.
Loaded "ATL100.DLL" at address 0x69720000. Successfully hooked module.
Entrypoint reached. All implicit modules have been loaded.
Loaded "APPHELP.DLL" at address 0x757A0000. Successfully hooked module.
DllMain(0x757A0000, DLL_PROCESS_ATTACH, 0x00000000) in "APPHELP.DLL" called.
DllMain(0x757A0000, DLL_PROCESS_ATTACH, 0x00000000) in "APPHELP.DLL" returned 1 (0x1).
DllMain(0x636E0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MSVCR100.DLL" called.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "FlsAlloc") called from "MSVCR100.DLL" at address 0x636FBA3B and returned 0x76F4F179.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "FlsGetValue") called from "MSVCR100.DLL" at address 0x636FBA48 and returned 0x76F56C3F.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "FlsSetValue") called from "MSVCR100.DLL" at address 0x636FBA55 and returned 0x76F56C57.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "FlsFree") called from "MSVCR100.DLL" at address 0x636FBA62 and returned 0x76F5B7B5.
DllMain(0x636E0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MSVCR100.DLL" returned 1 (0x1).
DllMain(0x747D0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "BZLIB.DLL" called.
DllMain(0x747D0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "BZLIB.DLL" returned 1 (0x1).
DllMain(0x69ED0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MSVCP100.DLL" called.
DllMain(0x69ED0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MSVCP100.DLL" returned 1 (0x1).
DllMain(0x6C2B0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "REGEXP.DLL" called.
DllMain(0x6C2B0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "REGEXP.DLL" returned 1 (0x1).
DllMain(0x75D80000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MSVCRT.DLL" called.
DllMain(0x75D80000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MSVCRT.DLL" returned 1 (0x1).
DllMain(0x75CE0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "USP10.DLL" called.
LoadLibraryA("gdi32.dll") called from "USP10.DLL" at address 0x75CF6010.
LoadLibraryA("gdi32.dll") returned 0x77A40000.
GetProcAddress(0x77A40000 [GDI32.DLL], "GetCharABCWidthsI") called from "USP10.DLL" at address 0x75CF6045 and returned 0x77A4BD76.
DllMain(0x75CE0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "USP10.DLL" returned 1 (0x1).
DllMain(0x779E0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "LPK.DLL" called.
DllMain(0x779E0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "LPK.DLL" returned 1 (0x1).
DllMain(0x77A40000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "GDI32.DLL" called.
DllMain(0x77A40000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "GDI32.DLL" returned 1 (0x1).
DllMain(0x76E30000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "USER32.DLL" called.
LoadLibraryW("C:\Windows\system32\IMM32.DLL") called from "USER32.DLL" at address 0x76E50AEB.
Loaded "IMM32.DLL" at address 0x779C0000. Successfully hooked module.
Loaded "MSCTF.DLL" at address 0x77790000. Successfully hooked module.
DllMain(0x77790000, DLL_PROCESS_ATTACH, 0x00000000) in "MSCTF.DLL" called.
DllMain(0x77790000, DLL_PROCESS_ATTACH, 0x00000000) in "MSCTF.DLL" returned 1 (0x1).
DllMain(0x779C0000, DLL_PROCESS_ATTACH, 0x00000000) in "IMM32.DLL" called.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmWINNLSEnableIME") called from "USER32.DLL" at address 0x76E4FD74 and returned 0x779D0171.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmWINNLSGetEnableStatus") called from "USER32.DLL" at address 0x76E4FD89 and returned 0x779D0198.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSendIMEMessageExW") called from "USER32.DLL" at address 0x76E4FD9E and returned 0x779D0426.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSendIMEMessageExA") called from "USER32.DLL" at address 0x76E4FDB3 and returned 0x779D0441.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmIMPGetIMEW") called from "USER32.DLL" at address 0x76E4FDC8 and returned 0x779D069F.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmIMPGetIMEA") called from "USER32.DLL" at address 0x76E4FDDD and returned 0x779D06D3.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmIMPQueryIMEW") called from "USER32.DLL" at address 0x76E4FDF2 and returned 0x779D0504.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmIMPQueryIMEA") called from "USER32.DLL" at address 0x76E4FE07 and returned 0x779D0610.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmIMPSetIMEW") called from "USER32.DLL" at address 0x76E4FE1C and returned 0x779D0280.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmIMPSetIMEA") called from "USER32.DLL" at address 0x76E4FE31 and returned 0x779D03A8.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmAssociateContext") called from "USER32.DLL" at address 0x76E4FE46 and returned 0x779C3515.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmEscapeA") called from "USER32.DLL" at address 0x76E4FE5B and returned 0x779CA08A.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmEscapeW") called from "USER32.DLL" at address 0x76E4FE70 and returned 0x779CA309.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetCompositionStringA") called from "USER32.DLL" at address 0x76E4FE85 and returned 0x779C84B9.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetCompositionStringW") called from "USER32.DLL" at address 0x76E4FE9A and returned 0x779C77B0.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetCompositionWindow") called from "USER32.DLL" at address 0x76E4FEAF and returned 0x779C2D44.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetContext") called from "USER32.DLL" at address 0x76E4FEC4 and returned 0x779C299D.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetDefaultIMEWnd") called from "USER32.DLL" at address 0x76E4FED9 and returned 0x779C27F2.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmIsIME") called from "USER32.DLL" at address 0x76E4FEEE and returned 0x779C2CEB.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmReleaseContext") called from "USER32.DLL" at address 0x76E4FF03 and returned 0x779C2A67.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmRegisterClient") called from "USER32.DLL" at address 0x76E4FF18 and returned 0x779C25B2.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetCompositionFontW") called from "USER32.DLL" at address 0x76E4FF2D and returned 0x779C6CA3.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetCompositionFontA") called from "USER32.DLL" at address 0x76E4FF42 and returned 0x779C6C07.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetCompositionFontW") called from "USER32.DLL" at address 0x76E4FF57 and returned 0x779C47EF.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetCompositionFontA") called from "USER32.DLL" at address 0x76E4FF6C and returned 0x779C6D3F.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetCompositionWindow") called from "USER32.DLL" at address 0x76E4FF81 and returned 0x779C4772.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmNotifyIME") called from "USER32.DLL" at address 0x76E4FF96 and returned 0x779C49CD.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmLockIMC") called from "USER32.DLL" at address 0x76E4FFAB and returned 0x779C2827.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmUnlockIMC") called from "USER32.DLL" at address 0x76E4FFC0 and returned 0x779C28A8.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmLoadIME") called from "USER32.DLL" at address 0x76E4FFD5 and returned 0x779C2FC6.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetOpenStatus") called from "USER32.DLL" at address 0x76E4FFEA and returned 0x779C4D84.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmFreeLayout") called from "USER32.DLL" at address 0x76E4FFFF and returned 0x779CA548.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmActivateLayout") called from "USER32.DLL" at address 0x76E50014 and returned 0x779C9B87.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetCandidateWindow") called from "USER32.DLL" at address 0x76E50029 and returned 0x779C2D87.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetCandidateWindow") called from "USER32.DLL" at address 0x76E5003E and returned 0x779C6EB9.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmConfigureIMEW") called from "USER32.DLL" at address 0x76E50053 and returned 0x779C9EAC.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetConversionStatus") called from "USER32.DLL" at address 0x76E50068 and returned 0x779C37DC.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetConversionStatus") called from "USER32.DLL" at address 0x76E5007D and returned 0x779C4C7D.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetStatusWindowPos") called from "USER32.DLL" at address 0x76E50092 and returned 0x779C6E51.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetImeInfoEx") called from "USER32.DLL" at address 0x76E500A7 and returned 0x779C2DD7.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmLockImeDpi") called from "USER32.DLL" at address 0x76E500BC and returned 0x779C2AC6.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmUnlockImeDpi") called from "USER32.DLL" at address 0x76E500D1 and returned 0x779C2A79.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetOpenStatus") called from "USER32.DLL" at address 0x76E500E6 and returned 0x779C6766.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetActiveContext") called from "USER32.DLL" at address 0x76E500FB and returned 0x779C2B63.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmTranslateMessage") called from "USER32.DLL" at address 0x76E50110 and returned 0x779CFDB9.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmLoadLayout") called from "USER32.DLL" at address 0x76E50125 and returned 0x779C4356.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmProcessKey") called from "USER32.DLL" at address 0x76E5013A and returned 0x779C48BF.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmPutImeMenuItemsIntoMappedFile") called from "USER32.DLL" at address 0x76E5014F and returned 0x779D599C.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmGetProperty") called from "USER32.DLL" at address 0x76E50164 and returned 0x779C4AF6.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetCompositionStringA") called from "USER32.DLL" at address 0x76E50179 and returned 0x779C9166.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSetCompositionStringW") called from "USER32.DLL" at address 0x76E5018E and returned 0x779C918D.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmEnumInputContext") called from "USER32.DLL" at address 0x76E501A3 and returned 0x779C40D2.
GetProcAddress(0x779C0000 [IMM32.DLL], "ImmSystemHandler") called from "USER32.DLL" at address 0x76E501B8 and returned 0x779CBD2A.
GetProcAddress(0x779C0000 [IMM32.DLL], "CtfImmTIMActivate") called from "USER32.DLL" at address 0x76E501C9 and returned 0x779C2ED6.
GetProcAddress(0x779C0000 [IMM32.DLL], "CtfImmRestoreToolbarWnd") called from "USER32.DLL" at address 0x76E501DA and returned 0x779D5C1A.
GetProcAddress(0x779C0000 [IMM32.DLL], "CtfImmHideToolbarWnd") called from "USER32.DLL" at address 0x76E501EB and returned 0x779D5C51.
GetProcAddress(0x779C0000 [IMM32.DLL], "CtfImmDispatchDefImeMessage") called from "USER32.DLL" at address 0x76E501FC and returned 0x779C1579.
GetProcAddress(0x779C0000 [IMM32.DLL], "CtfImmNotify") called from "USER32.DLL" at address 0x76E5020D and returned 0x779C152D.
GetProcAddress(0x779C0000 [IMM32.DLL], "CtfImmSetDefaultRemoteKeyboardLayout") called from "USER32.DLL" at address 0x76E5021E and returned 0x779D5EB7.
GetProcAddress(0x779C0000 [IMM32.DLL], "CtfImmGetCompatibleKeyboardLayout") called from "USER32.DLL" at address 0x76E5022F and returned 0x779D5EC7.
DllMain(0x779C0000, DLL_PROCESS_ATTACH, 0x00000000) in "IMM32.DLL" returned 1 (0x1).
LoadLibraryW("C:\Windows\system32\IMM32.DLL") returned 0x779C0000.
GetProcAddress(0x779E0000 [LPK.DLL], "LpkTabbedTextOut") called from "GDI32.DLL" at address 0x77A49FDD and returned 0x779E54F3.
GetProcAddress(0x779E0000 [LPK.DLL], "LpkPSMTextOut") called from "GDI32.DLL" at address 0x77A49FE8 and returned 0x779E4251.
GetProcAddress(0x779E0000 [LPK.DLL], "LpkDrawTextEx") called from "GDI32.DLL" at address 0x77A49FF3 and returned 0x779E1770.
GetProcAddress(0x779E0000 [LPK.DLL], "LpkEditControl") called from "GDI32.DLL" at address 0x77A49FFE and returned 0x779E706C.
DllMain(0x76E30000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "USER32.DLL" returned 1 (0x1).
DllMain(0x6C290000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "ZLIBWAPI.DLL" called.
DllMain(0x6C290000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "ZLIBWAPI.DLL" returned 1 (0x1).
DllMain(0x727E0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "BUGTRAP.DLL" called.
LoadLibraryA("COMCTL32.dll") called from "BUGTRAP.DLL" at address 0x727F8C82.
LoadLibraryA("COMCTL32.dll") returned 0x747F0000.
GetProcAddress(0x747F0000 [COMCTL32.DLL], "InitCommonControlsEx") called from "BUGTRAP.DLL" at address 0x727F8D5A and returned 0x748109CE.
DllMain(0x727E0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "BUGTRAP.DLL" returned 1 (0x1).
DllMain(0x73E50000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "HASHLIB.DLL" called.
DllMain(0x73E50000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "HASHLIB.DLL" returned 1 (0x1).
DllMain(0x691B0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "SQLITE3.DLL" called.
DllMain(0x691B0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "SQLITE3.DLL" returned 1 (0x1).
DllMain(0x76130000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "SHLWAPI.DLL" called.
DllMain(0x76130000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "SHLWAPI.DLL" returned 1 (0x1).
DllMain(0x747F0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "COMCTL32.DLL" called.
GetProcAddress(0x779E0000 [LPK.DLL], "LpkEditControl") called from "COMCTL32.DLL" at address 0x7481E933 and returned 0x779E706C.
DllMain(0x747F0000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "COMCTL32.DLL" returned 1 (0x1).
DllMain(0x6D220000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MSIMG32.DLL" called.
DllMain(0x6D220000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MSIMG32.DLL" returned 1 (0x1).
DllMain(0x5C850000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MFC100U.DLL" called.
LoadLibraryW("UxTheme.dll") called from "MFC100U.DLL" at address 0x5C8CF2B5.
Loaded "UXTHEME.DLL" at address 0x74670000. Successfully hooked module.
DllMain(0x74670000, DLL_PROCESS_ATTACH, 0x00000000) in "UXTHEME.DLL" called.
DllMain(0x74670000, DLL_PROCESS_ATTACH, 0x00000000) in "UXTHEME.DLL" returned 1 (0x1).
LoadLibraryW("UxTheme.dll") returned 0x74670000.
GetProcAddress(0x74670000 [UXTHEME.DLL], "DrawThemeParentBackground") called from "MFC100U.DLL" at address 0x5C8F48AE and returned 0x746753E5.
GetProcAddress(0x74670000 [UXTHEME.DLL], "DrawThemeTextEx") called from "MFC100U.DLL" at address 0x5C8F48C1 and returned 0x746763E6.
GetProcAddress(0x74670000 [UXTHEME.DLL], "BufferedPaintInit") called from "MFC100U.DLL" at address 0x5C8F48D4 and returned 0x7467940E.
GetProcAddress(0x74670000 [UXTHEME.DLL], "BufferedPaintUnInit") called from "MFC100U.DLL" at address 0x5C8F48E7 and returned 0x746794AB.
GetProcAddress(0x74670000 [UXTHEME.DLL], "BeginBufferedPaint") called from "MFC100U.DLL" at address 0x5C8F48FA and returned 0x746749A1.
GetProcAddress(0x74670000 [UXTHEME.DLL], "EndBufferedPaint") called from "MFC100U.DLL" at address 0x5C8F490D and returned 0x74673F9A.
LoadLibraryW("C:\Windows\system32\dwmapi.dll") called from "MFC100U.DLL" at address 0x5C8CF2B5.
Loaded "DWMAPI.DLL" at address 0x74340000. Successfully hooked module.
DllMain(0x74340000, DLL_PROCESS_ATTACH, 0x00000000) in "DWMAPI.DLL" called.
DllMain(0x74340000, DLL_PROCESS_ATTACH, 0x00000000) in "DWMAPI.DLL" returned 1 (0x1).
LoadLibraryW("C:\Windows\system32\dwmapi.dll") returned 0x74340000.
GetProcAddress(0x74340000 [DWMAPI.DLL], "DwmExtendFrameIntoClientArea") called from "MFC100U.DLL" at address 0x5C8F495B and returned 0x74343510.
GetProcAddress(0x74340000 [DWMAPI.DLL], "DwmDefWindowProc") called from "MFC100U.DLL" at address 0x5C8F496E and returned 0x74343DF4.
GetProcAddress(0x74340000 [DWMAPI.DLL], "DwmIsCompositionEnabled") called from "MFC100U.DLL" at address 0x5C8F4981 and returned 0x74341610.
GetProcAddress(0x747F0000 [COMCTL32.DLL], "DllGetVersion") called from "MFC100U.DLL" at address 0x5CA093C8 and returned 0x74835A6F.
LoadLibraryW("KERNEL32.DLL") called from "MFC100U.DLL" at address 0x5C8CF2B5.
LoadLibraryW("KERNEL32.DLL") returned 0x76F00000.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "GetThreadPreferredUILanguages") called from "MFC100U.DLL" at address 0x5C9FE820 and returned 0x76F42BAB.
LoadLibraryExW("C:\Windows\system32\MFC100ENU.DLL", 0x00000000, 0x00000000) called from "MFC100U.DLL" at address 0x5C9FE7BF.
Loaded "MFC100ENU.DLL" at address 0x6D950000. Successfully hooked module.
LoadLibraryExW("C:\Windows\system32\MFC100ENU.DLL", 0x00000000, 0x00000000) returned 0x6D950000.
DllMain(0x5C850000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "MFC100U.DLL" returned 1 (0x1).
DllMain(0x69720000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "ATL100.DLL" called.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "FlsAlloc") called from "ATL100.DLL" at address 0x69732C1D and returned 0x76F4F179.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "FlsGetValue") called from "ATL100.DLL" at address 0x69732C2A and returned 0x76F56C3F.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "FlsSetValue") called from "ATL100.DLL" at address 0x69732C37 and returned 0x76F56C57.
GetProcAddress(0x76F00000 [KERNEL32.DLL], "FlsFree") called from "ATL100.DLL" at address 0x69732C44 and returned 0x76F5B7B5.
DllMain(0x69720000, DLL_PROCESS_ATTACH, 0x002FFBA8) in "ATL100.DLL" returned 1 (0x1).
DllMain(0x757A0000, DLL_PROCESS_DETACH, 0x00000000) in "APPHELP.DLL" called.
DllMain(0x757A0000, DLL_PROCESS_DETACH, 0x00000000) in "APPHELP.DLL" returned 1 (0x1).
Unloaded "APPHELP.DLL" at address 0x757A0000.
Second chance exception 0xC000001D (Illegal Instruction) occurred in "SHAREAZA.EXE" at address 0x0139B482.
Exited "SHAREAZA.EXE" (process 0x106C) with code -1073741795 (0xC000001D).
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby raspopov » 01 Jan 2014 05:28

"Illegal Instruction" exception - you have old CPU without SSE2.
User avatar
raspopov
Project Admin
 
Posts: 945
Joined: 13 Jun 2009 12:30

Re: Shareaza Not Loading

Postby julianekg » 01 Jan 2014 17:34

Yes it is an old cpu. Can run 2.6 unless there is a fix.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby queuesclimber » 01 Jan 2014 18:52

This can't be fixed. It's because of how it is compiled.
You will need a version without sse2, and don't know if Development find time for that.
Maybe it can be fixed, but did you ever thought about do your Version from code.
You can excactly adjust to your old processor. Do you use Vista or XP ?
It's really easy.
OK, you have to download 3 or 4 programs and adjust 2 settings.
And you can always ask. :)
queuesclimber
 
Posts: 299
Joined: 29 Oct 2013 16:24

Re: Shareaza Not Loading

Postby julianekg » 02 Jan 2014 03:53

If someone could walk me through it I'm willing to try. But for now 2.6 debug build is working fine. Thanks for input.
julianekg
 
Posts: 10
Joined: 20 Dec 2013 05:26

Re: Shareaza Not Loading

Postby queuesclimber » 02 Jan 2014 19:35

Check your pm and install WinRar.
queuesclimber
 
Posts: 299
Joined: 29 Oct 2013 16:24


Return to Help and Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron