Options.Advanced/nl

Dit is de dialoog Geavanceerde instellingen, te benaderen in de tabbladstijl.

Het menu met Geavanceerde instellingen in v2.5.0.0

Wijzig deze instellingen alleen als je weet wat je doet. Er kan van alles met Shareaza of je computer verkeerd gaan.

De standaard instellingen zijn voor de meeste gebruikers optimaal en blijf dus het liefste van deze instellingen af als je niet van te voren weet wat je moet wijzigen. Je kunt de belangrijkste wijzigingen ook via de normale menu-keuzes wijzigen.

Bandwidth

Dit onderdeel Bandbreedte geeft een gebruiker de mogelijkheid om limieten te stellen aan het gebruik van bandbreedte door bepaalde functies. De opgegeven waarde verzekert dat deze waarde niet door de aan dat aspect gerelateerde functie overschreden wordt. Waardes in Kilobits per seconde, waarbij 0 ongelimiteerd aangeeft.

Bandwidth.HubIn

• Default: 0 Kb/s (Ongelimiteerd)
• Limiteert de binnenkomende bandbreedte voor de netwerk connecties wanneer Hub Mode is ingeschakeld.

Bandwidth.HubOut

• Default: 0 Kb/s (Ongelimiteerd)
• Limiteert de uitgaande bandbreedte voor de netwerk connecties wanneer Hub Mode is ingeschakeld.

Bandwidth.HubUploads

• Default: 40 Kb/s
• Limiteert je upload-snelheid wanneer Hub Mode ingeschakeld is, zodat je beter kunt fungeren als hub. (Wordt ontraden sinds 8866 . Vervangen door een vaste limiet van 50% van de beschikbare bandbreedte.)

Bandwidth.LeafIn

• Default: 0 Kb/s (Ongelimiteerd)
• Limiteert de binnenkomende bandbreedte voor de netwerk connecties wanneer Leaf Mode is ingeschakeld.

Bandwidth.LeafOut

• Default: 0 Kb/s (Ongelimiteerd)
• Limiteert de uitgaande bandbreedte voor de netwerk connecties wanneer Leaf Mode is ingeschakeld.

Bandwidth.PeerIn

• Default: 0 Kb/s (Ongelimiteerd)
• Limiteert de binnenkomende bandbreedte voor de netwerk connecties wanneer de verouderde Peer Mode is ingeschakeld. Je zult deze instelling waarschijnlijk nooit hoeven aan te passen, behalve als je weet wat Peer Mode is.

Bandwidth.PeerOut

• Default: 0 Kb/s (Ongelimiteerd)
• Limiteert de uitgaande bandbreedte voor de netwerk connecties wanneer de verouderde Peer Mode is ingeschakeld. Je zult deze instelling waarschijnlijk nooit hoeven aan te passen, behalve als je weet wat Peer Mode is.

Bandwidth.Request

• Default: 32 Kb/s
• Definieert de limiet van aanvragen naar andere clients vanuit je lokale computer, inclusief Transfer Requests, Search Requests en andere berichten niet direct gerelateerd aan een Hub, Leaf or Peer connectie.

Bandwidth.UdpOut

• Default: 0 Kb/s (Ongelimiteerd)
• Definieert de limiet voor UDP verkeer vanuit de locale computer. UDP verkeer wordt hoofdzakelijk gebruikt door het G2 netwerk wanneer een herhalende zoekopdracht wordt uitgevoerd door het gehele G2 netwerk. Dit soort verkeer is voornamelijk gelimiteerd omdat sommige internetproviders en/of hardware maar een bepaalde hoeveelheid UDP verkeer wordt toegestaan per seconde, of doordat de data (packets) verloren gaat (dropped) wanneer de connectie een knelpunt bereikt door instabiliteit en lage prioriteit. Door deze limiet lager in te stellen kan de connectie met het G2 netwerk efficienter worden, wanneer je te maken hebt met inefficientie door verloren (dropped) UDP packets.

BitTorrent

Dit onderdeel beslaat alleen de instellingen die het BitTorrent netwerk en de BitTorrent datatransmissie gebruiken.

BitTorrent.AdvancedInterface

• Default: 0 (False)
• In- en uitschakelen van de geavanceerde interface voor BitTorrent.

BitTorrent.AdvancedInterfaceSet

• Default: 0 (False)

BitTorrent.AutoClear

• Default: 0 (False)

BitTorrent.AutoSeed

• Default: 1 (True)
• Indien true, als BitTorrent bezig was met delen bij het stoppen van het programma dan wordt er opnieuw gedeeld bij het weer opstarten van Shareaza.

BitTorrent.BandwidthPercentage

• Default: 80%
• Shareaza zal dit percentage van je uploadsnelheid proberen te reserveren voor je BitTorrent uploads.

BitTorrent.ClearRatio

• Default: 120%
• Nadat een torrent dit percentage van de te downloaden data heeft geupload, zal het automatisch van de lijst worden verwijderd. Als je dit op 100% zet, dan zal een torrent toch nog 110% van de grootte nodig hebben omdat er natuurlijk altijd overhead is.

BitTorrent.DefaultTrackerPeriod

• Default: 5 m
• Geeft aan hoe vaak Shareaza contact opneemt met de tracker, wanneer door de tracker niet aangegeven wordt hoe vaak er contact opgenomen moet worden. De standaard-instellingen van trackers geven aan BT Clients vaak een vereiste van 30 minuten aan. (De tracker beheert hoe vaak dit gebeurt.) Wijzig deze instelling niet.

BitTorrent.DhtPruneTime

• Default: 30 m
• Deze instelling is nog niet functioneel, omdat Dht nog niet volledig geïmplementeerd is (op 03-11-2009).

BitTorrent.DownloadConnections

• Default: 40
• Bepaald het aantal verbindingenections dat er voor BitTorrent downlaods geopend kan worden.

BitTorrent.DownloadTorrents

• Default: 3
• Bepaald het aantal actieve torrent downloads. Een nieuwe Torrent wordt gepauzeerd als de limiet is bereikt, todat er een torrent gereed is met downloaden. Als je handmatig een gepauzeerde torrent start, dan geldt deze limiet niet.

BitTorrent.EnableAlways

• Default: 1 (True)

BitTorrent.Endgame

• Default: 1 (True)

BitTorrent.LinkPing

• Defuault: 120 s
• Definieert de timeout periode tussen keep-alive pings op een BitTorrent connectie. Deze pings, transmissies van kleine data-pakketjes, worden gebruikt om de externe host te laten weten dat de lokale host nog steeds een actieve connectie onderhoudt.

BitTorrent.LinkTimeout

• Default: 180 s
• Definieert de timeout periode voordat Shareaza een actieve connectie afsluit, wanneer deze geen LinkPing heeft ontvangen van de externe host (zie hierboven).

BitTorrent.PreferenceBTSources

• Default: 1 (True)

BitTorrent.RandomPeriod

• Default: 30 s

BitTorrent.RequestLimit

• Default: 128 KB
• Definieert de maximale request size (chunk size), toegestaan door een externe host wanneer er een aanvraag voor een datatransmissie wordt gestuurd. De request size is de bestandsgrootte van deze aanvraag.

BitTorrent.RequestPipe

• Default: 4
• Definieert het aantal in behandeling genomen BitTorrent aanvragen dat Shareaza tegelijkertijd wil accepteren.

BitTorrent.RequestSize

• Default: 16 KB
• Definieert de bestandsgrootte aangevraagd door de lokale host wanneer er een datatransmissie wordt aangevraagd door externe hosts.

Wijzig deze instelling niet.

BitTorrent.SourceExchangePeriod

• Default: 10 m
• Definieert de timeout periode tussen bron-overdrachten voor BitTorrent downloads.

BitTorrent.TorrentCodePage

• Default: 0 (gebruik systeem's code pagina)
• Shareaza neemt aan, voor torrents die geen encoding key hebben, en die geen unicode character set (utf-8) gebruiken, dat de naam en path keys worden bepaald met je systeem's code pagina. Gebruikers kunnen deze waarde wijzigen in een specifieke windows code pagina. Dit is nuttig om bepaalde interface gedeeltes van Shareaza goed weer te geven, het bepaalt niet hoe bestanden worden opgeslagen. een willekeurig voorbeeld: als je windows instelt om Korean (code page 949) te gebruiken, dan kunnen Chinese encoded torrents (using code page 950, traditional chinese) mogelijk niet goed weergegeven worden in de interface. Je kunt dan de standaardinstelling wijzigen in 950. Je kunt ook Japanse (932) of Simplified Chinese (936) torrents tegenkomen.

BitTorrent.TorrentExtraKeys

• Default: 1 (True)
• If true, Shareaza will be able to read the encoding key, if present, and the path.utf-8 key and name.utf-8 key, if present.

BitTorrent.TrackerKey

• Default: 1 (True)
• For trackers that support the Key tracker protocol extension, it allows Shareaza to use a random key in the announces.

BitTorrent.UploadCount

• Default: 4
• Definieert het maximale aantal uploadplekken voor BitTorrent hosts die datatransmissies aanvragen. BitTorrent maakt geen gebruik van een zogenaamd queueing system, waarin iedereen zijn transmissie om de beurt mag starten, waardoor dit het maxmimale aantal BitTorrent hosts zijn waar Shareaza toestemming tot connectie aan kan geven op een bepaald moment. Je kunt dit mate verhogen.

Community

Settings for Chat.

Community.AwayMessageIdleTime

• Default: 20 m

Community.ChatAllNetworks

• Default: 1 (True)

Community.ChatCensor

• Default: 0 (False)

Community.ChatEnable

• Default: 1 (True)

Community.ChatFilter

• Default: 1 (True)

Community.ChatFilterED2K

• Default: 1 (True)
• Allows Shareaza to filter known common spam messages, using the messagefilter.dat file, from an ed2k chat window.

Community.ServeFiles

• Default: 1 (True)

Community.ServeProfile

• Default: 1 (True)

Community.Timestamp

• Default: 1 (True)

Connection

Dit onderdeel toont opties om TCP connectie instellingen aan te passen.

Connection.AutoConnect

• Default: 1 (True)
• In- en uitschakelen automatische verbinding bij opstarten.

Connection.ConnectThrottle

• Default: 250 ms

Connection.DeleteFirewallException

• Default: 0 (False)

Connection.DeleteUPnPPorts

• Default: 1 (True)
• Verwijder de UPnP port-forwarding regels als Shareaza stopt. Deze regels worden opnieuw aangemaakt als Shareaza weer gestart wordt. Het wordt aanbevolen om deze instelling niet te wijzigen.

Connection.DetectConnectionLoss

• Default: 1 (True)
• Shareaza kan soms zien dat de internetverbinding verbroken is, en daarop het gedrag aanpassen.

Connection.DetectConnectionReset

• Default: 0 (False)

Connection.EnableFirewallException

• Default: 1 (True)

Connection.EnableUPnP

• Default: 1 (True)
• In- en uitschakelen van automatische router configuratie via UPnP.

Connection.FailureLimit

• Default: 3

Connection.FailurePenality

• Default: 300 s

Connection.FirewallState

• Default: 0

Connection.ForceConnectedState

• Default: 1 (True)
• Kijkt of je webbrowser in offline mode is, en het in dat geval weer online mode te krijgen.

Connection.IgnoreLocalIP

• Default: 1 (True)
• Overslaan LAN IPs.

Connection.IgnoreOwnIP

• Default: 1 (True)
• Negeer je eigen IP adres. Hiermee voorkom je dat Shareaza vanaf je eigen locatie het gevraagde bestand download.

Connection.InBind

• Default: 0 (False)

Connection.InPort

• Default: 6346
• Welke poort moet Shareaza gebruiken.

Connection.RandomPort

• Default: 0 (False)
• Laat Shareaza een willekeurige poort kiezen. Doe dit liever niet, er zou een poort gekozen kunnen worden die al in gebruik is bij een andere applicatie.

Connection.RequireForTransfers

• Default: 1 (True)
• Geeft aan of het noodzakelijk is een netwerk op te zetten en te onderhouden met het desbetreffende netwerk (Gnutella, eDonkey, etc.), om uploads of downloads te starten op dat netwerk. Wanneer deze op 0 (false) ingesteld wordt, kunnen overdrachten ook met een bepaald protocol plaatsvinden zonder connectie met een netwerk.

Ook bij false zijn er beperkingen aan het effect van deze instelling.

Connection.SendBuffer

• Default: 2048
• Definieert de hoeveelheid data die opgebouwd moet worden voordat deze als pakket naar de host verzonden wordt, tenzij deze uit de buffer afgedwongen verzonden wordt. Daarbij, de hoeveelheid data wordt ook beperkt door de buffer-grootte die aangegeven is. Waardes in bytes.

Connection.SkipWANIPSetup

• Default: 0 (False)
• Een optie van de UPnP setup.

Connection.SkipWANPPPSetup

• Default: 0 (False)
• Een optie van de UPnP setup.

Connection.SlowConnect

• Default: 0 (False) De standaardwaarde is 1 als Windows XP SP2 of vergelijkbaar systeem is gedetecteerd (dit alleen als General.IgnoreXPsp2 op 0 staat).
• Deze instelling is van belang voor gebruikers van Windows XP en meer recentere Windows versies. Indien de waarde true is, en de gebruiker wil met meer dan één netwerk verbinden, dan probeert Shareaza steeds met één extra netwerk te verbinden nadat het verbinden met het netwerk gelukt is. Shareaza wacht ook met het downloads starten totdat de gebruiker aangeeft te willen verbinden. Dit is een afhandeling die zo gedaan is door de beperking in XP service pack 2 met betrekking tot half-open uitgaande verbindingen.

Connection.TimeoutConnect

• Default: 16 s
• Definieert de timeout voor verbindingspogingen met andere gebruikers van het netwerk.

Connection.TimeoutHandshake

• Default: 45 s
• Definieert de timeout voor handshaking.

Connection.TimeoutTraffic

• Default: 140 s
• Definieert de hoeveelheid tijd die Shareaza wacht nadat een connectie met de host gemaakt is, voordat deze weer afgesloten wordt wanneer er geen data overgedragen wordt. Te lage instellingen kunnen er tot leiden dat er geen enkele verbinding kan worden gemaakt.

Connection.UPnPRefreshTime

• Default: 30 min
• Definieert het tijdsinterval voor het periodiek verversen van de UPnP port mappings.

Discovery

Dit onderdeel aan opties configureert hoe Shareaza handelt wanneer aanvragen naar host discovery services worden gestuurd.

Discovery.AccessThrottle

• Default: 60 m
• Definieert de timeout periode tussen discovery service aanvragen wanneer de bootstrap discovery queries worden uitgevoerd.

Discovery.BootstrapCount

• Default: 10
• Definieert het aantal discovery service aanvragen wanneer een connectie (opnieuw) opgezet wordt met de gnutella en G2netwerken. Dit treedt op wanneer Shareaza voor het eerst opstart wanneer “connect to Gnutella on startup” is ingesteld.

Discovery.CacheCount

• Default: 50
• Definieert het maximale aantal caches in het Discovery Service venster.

Discovery.DefaultUpdate

• Default: 60 m
• Definieert de timeout tussen aanvragen naar discovery service om de host cache te updaten. Deze worden uitgevoerd op het ingestelde interval indien Shareaza is gekoppeld aan het netwerk of een poging tot koppelen aan het Gnutella netwerk doet.

Discovery.EnableG1GWC

• Default: 0 (False)
• In- of uitschakelen van het gebruik van gnutella GWCs. Meestal gebruikt Shareaza uhc bootstraps voor gnutella host discovery.

Discovery.FailureLimit

• Default: 2
• Definieert het maximale aantal mislukte aanvragen richting discovery service voordat het contact leggen met de discovery buffer van de discovery cache wordt stopgezet.

Discovery.Lowpoint

• Default: 10
• Definieert de minimale hoeveelheid aan host discovery services die in de host discovery services cache gehouden wordt.

Discovery.UpdatePeriod

• Default: 30 m

Downloads

These options configure the way Shareaza handles download requests and file transfers from remote hosts.

Downloads.AllowBackwards

• Default: 1 (True)
• If true, this option allows Shareaza to request data in reverse order and download from sources who send data in reverse order.

Downloads.AutoClear

• Default:0 (False)
• If true, Shareaza automatically cleans up the downloads window of completed files.

Downloads.AutoExpand

• Default:0 (False)

Downloads.BufferSize

• Default: 80 KB
• Defines the buffer size allocated for each file transfer connection from remote hosts. Larger buffers allow data to be read from the Windows network buffers more quickly so that more data can be received if the connection becomes bottlenecked due to high CPU usage at the local host. Once the buffer is full, data requests to remote hosts will be paused until there is more space available in the buffer. This option may be used to handle large amounts of download bandwidth with mid-grade computers which cannot consistently handle the stress of high-speed connections.

Downloads.ChunkSize

• Default: 512 KB
• Defines the default file transfer request size in Kilobytes. When TigerTree hashing data is available, Shareaza will ignore this setting and make requests which are the same size as TigerTree verification chunks. This setting does not affect the total amount of data that can be downloaded from a remote host in a single active connection, but there will be a small pause between chunks if more than one is requested sequentially from a single remote host.

Downloads.ChunkStrap

• Default: 128 KB
• Defines the amount of data Shareaza will attempt to download from the beginning of the file before downloading from other parts of the file. The ChunkStrap setting is important to provide Shareaza with enough header data in most files for an accurate preview before the download is completed. It does not affect downloading from other parts of the file if the beginning is unavailable and will not slow down the file transfer in any way. If a file cannot be previewed because there is not enough header data to determine the properties of the file, setting this to a larger value may make previews of that type of file more convienient.

Downloads.ClearDelay

• Default: 30 s
• Defines the amount of time Shareaza will wait before clearing a completed (and verified or unverified if possible) download from the window if the AutoClear option is checked in the context menu of the downloads window of the Transfers tab. This option in no way affects the downloaded file.

Downloads.ConnectThrottle

• Default: 250 ms
• How long Shareaza will wait before establishing another connection. Increasing this setting can help to ease the stress on devices like routers which have a set number of connections that they can keep track of at once. 100 ms means 10 connections per second. It can be safely be increased to at least 1000 ms.

Downloads.FlushSD

• Default: 1 (True)

Downloads.MaxAllowedFailures

• Default: 10

Downloads.MaxConnectingSources

• Default: 28
• It depends on the connection speed, however on Windows 9x-ME is always 16.

If Windows XP SP2 or similar environment is detected (only if IgnoreXPsp2 is 0) default value is 8.

Controls the number of simultaneous download connections in the connecting state. This is useful for users of Windows XP SP 2 because there is a new limit on the number of connections in the connecting state.

Downloads.MaxFiles

• Default: 20

Downloads.MaxFileSearches

• Default: 0
• It depends on the connection speed, however on Windows 9x-ME is always 0.

Downloads.MaxReviews

• Default: 64

Downloads.MaxTransfers

• Default: 100

Downloads.Metadata

• Default: 1 (True)
• If true, Shareaza will retrieve descriptive metadata with file downloads.

Downloads.MinSources

• Default: 1
• Defines the minimum number of sources a file must have to prevent Shareaza from issuing automatic hash queries to find more sources for that file.

Downloads.NeverDrop

• Default: 0 (False)
• If true, Shareaza will never drop a source for a download under any circumstances. Typically, Shareaza will drop sources which return errors, repeated busy messages, or timeouts. This option can be used under controlled circumstances to retry hosts which may not always be available, but should be used with discretion to avoid corrupting the alternate-sources mesh on the Gnutella networks and causing slow transfer response from download entries. It is normally quite safe to keep it false since Shareaza can always rediscover valid source from alternate source exchange, or when requerying hubs or ed2k servers for sources.

Downloads.PushTimeout

• Default: 45 s
• Defines the timeout period for Shareaza to wait before giving up on a host it has asked to respond to a push request. The clock starts after the push request is sent to the remote host. Lowering this setting may make network operations more stable on 9x machines, but lessens the chance that hosts will respond in time to push requests, even if they are able to do so.

Downloads.QueueLimit

• Default: 0

Downloads.RequestHash

• Default: 0 (False)
• When this is enabled, it will force Shareaza to create a URL to a client requesting a resource by using a known hash if a QueryHit is returned which doesn't supply the URL to the resource.

Downloads.RequestHTTP11

• Default: 1 (True)
• If true, Shareaza will make requests to other clients using HTTP/1.1 as defined by RFC 2616.

Downloads.RequestURLENC

• Default: 1 (True)
• If true, Shareaza sends query URLs in an encoded form (for compatibility): all the special chars are changed to %xx where xx is the hex number of the ASCII value of the character.

Downloads.RetryDelay

• Default: 600 s
• Defines the starting timeout period that Shareaza waits before retrying a busy or otherwise unavailable source. This period is doubled with every unsuccessful request until the timeout becomes greater than the StarveTimeout. It isn't wise to change this value.

Downloads.SaveInterval

• Default: 60 s
• Time between updates of SD files. This ensures that you will not lose your progress in the event of a crash but has the side effect that it might cause increased disk activity.

Downloads.SearchPeriod

• Default: 120

Downloads.ShowGroups

• Default: 1 (True)
• If false, Shareaza will not show the sorting groups toolbar within the Downloads Window.

Downloads.ShowMonitorURLs

• Default: 1 (True)
• If true, Shareaza will show a bandwidth monitor window when starting a download from an HTTP or Magnet link or a .torrent file.

Downloads.ShowPercent

• Default: 0 (False)
• If true, Shareaza will display a green bar at the top of each download's transfer progress indicator which estimates the completed percentage of the file. This is useful for a graphical linear comparison of completed percentages as usually swarmed files are downloaded in dispersed chunks, making actual progress difficult to determine.

Downloads.ShowSources

• Default: 0 (False)

Downloads.SimpleBar

• Default: 0 (False)
• If true, Shareaza will show a linear progress indicator instead of the image that shows exactly which parts of the file have already been downloaded. This can save a few CPU resources and/or make scrolling in the Downloads Window more smoothly on very slow systems.

Downloads.SortColumns

• Default: 1 (True)
• If set to true, it allows simple sorting in the downloads window by clicking on column headers. Disabled by default as it may be CPU intensive, and may cause confusion.

Downloads.SortSources

• Default: 1 (True)

Downloads.SparseThreshold

• Default: 8 MB
• Defines the minimum file size of a download for Shareaza to create the incomplete holder for it as a "sparse" file on NTFS volumes. Sparse files help conserve space by compressing areas of the file with no data and can be helpful with large downloads while they are still incomplete. This option does not affect files created on or moved to non-NTFS volumes.

Downloads.StaggardStart

• Default: 0 (False)
• Setting this to 1 (True) makes Shareaza wait until one connection to a particular source is dealt with (either enqueued, downloading or dropped) before trying to initiate another connection to a different source. This will slow down the rate at which download connections will be formed, but may be of assistance to those with cranky routers.

Downloads.StartDroppedFailedSourcesNumber

• Default: 20

Downloads.StarveGiveup

• Default: 3 h

Downloads.StarveTimeout

• Default: 45 m
• Defines the minimum retry timeout a download is required to reach before becoming "starved." Downloads which become starved will not be accessed again during the active session unless the user forces them manually.

Downloads.VerifyED2K

• Default: 1 (True)

Downloads.VerifyFiles

• Default: 1 (True)
• If true, Shareaza will verify downloads using SHA1, ED2K, MD4/5, and other hashing algorithms if the hashes are available on the network. Turning this option off may save processor power when downloads are completed, but will increase the risk of downloading a corrupted file. It is recommended that this option be left on.

Downloads.VerifyTiger

• Default: 1 (True)
• If true, Shareaza will verify downloads using TTH (Tiger Tree Hashing) if the TTH information is available on the network. Turning this option off may save processor power during and after the download, but will increase the risk of downloading a corrupted file. It is recommended that this option be left on.

Downloads.WebHookEnable

• Default: 1 (True)
• This enables or disables integration with Internet Explorer. For integration with other browsers, see this Wiki page.

eDonkey

This section pertains to settings used with the eDonkey network and eDonkey file transfers only.

eDonkey.DequeueTime

• Default: 60 m
• Defines the maximum amount of time to wait for a client in your ed2k upload queue to call back before its position is dropped and forgotten about.

eDonkey.EnableAlways

• Default: 0 (False)

eDonkey.EndGame

• Default: 1 (True)
• Allow requests to more sources in the finishing stages of an ed2k download.

eDonkey.ExtendedRequest

• Default: 2

eDonkey.FastConnect

• Default: 0 (False)
• If servers often give you lowid, even though you ought to be accepting incoming connections, setting this to False may help.

eDonkey.ForceHighID

• Default: 1 (True)

eDonkey.FrameSize

• Default: 10 KB

eDonkey.GetSourcesThrottle

• Default: 8 h

eDonkey.LargeFileSupport

• Default: 1 (True)

eDonkey.LearnNewServers

• Default: 0 (False)
• If true, Shareaza will keep an updated host cache of eDonkey servers to connect with.

eDonkey.LearnNewServersClient

• Default: 0 (False)
• If false, Shareaza will not try to update its server list when connecting to an ed2k peer. This is to help prevent spam in the server list.

eDonkey.MagnetSearch

• Default: 1 (True)

eDonkey.MaxLinks

• Default: 200

eDonkey.MaxResults

• Default: 100

eDonkey.MaxShareCount

• Default: 1000
• The maximum number of files that will be sent in to the eD2K server and thus the maximum number of files that will be shared on eD2K. This can be used if a server is rejecting you for sharing too many files which bogs the server down.

eDonkey.MinServerFileSize

• Default: 0 MB

eDonkey.NumServers

• Default: 1

eDonkey.PacketThrottle

• Default: 500 ms
• Defines time between successive upload packets being sent.

eDonkey.QueryFileThrottle

• Default: 60 m

eDonkey.QueryGlobalThrottle

• Default: 1000 ms
• Defines the timeout period Shareaza waits before querying the next eDonkey server if the minimum number of desireable search results has not been reached.

eDonkey.QueryServerThrottle

• Default: 120 s
• Defines the timeout period Shareaza waits before sending the next query to any connected eDonkey servers.

eDonkey.QueueRankThrottle

• Default: 120 s

eDonkey.ReAskTime

• Default: 29 m

eDonkey.RequestPipe

• Default: 3

eDonkey.RequestSize

• Default: 90 KB
• Defines the download size Shareaza requests from remote hosts.

eDonkey.SendPortServer

• Default: 0 (False)

eDonkey.ServerWalk

• Default: 1 (True)

eDonkey.SourceThrottle

• Default: 1000 ms
• Limits the rate packets are sent.

eDonkey.StatsGlobalThrottle

• Default: 30 m

eDonkey.StatsServerThrottle

• Default: 7 d

Experimental

Experimental.EnableDIPPSupport

• Default: 0 (False)

Experimental.TestBTPartials

• Default: 0 (False)

Fonts

Fonts.FontSize

• Default: 11 px

General

General.AlwaysOpenURLs

• Default: 0 (False)

General.CloseMode

• Default: 2

General.DebugBTSources

• Default: 0 (False)

General.DebugLog

• Default: 0 (False)
• In- en uitschakelen van de debug logging functie van Shareaza. Indien ingeschakeld wordt de uitvoer van het Systeemvenster (Log level 4 - Debug) in een logfile "shareaza.log" opgeslagen in de gebruikersmap "C:\Documents and Settings\[Windows user name]\Application Data\Shareaza\Data". Dit kan een behoorlijk groot bestand worden. Schakel deze functie dan ook alleen in als je informatie nodig hebt om een probleem dat optreedt op te lossen. De logfile is (hoofdzakelijk) UTF-16, enkele delen zijn UTF-8. Lees ook General.MaxDebugLogSize.

General.DialogScan

• Default: 0 (False)

General.DiskSpaceStop

• Default: 25 M
• Als er minder dan deze ruimte vrij is op de harde schijf, pauzeer dan alle downloads.

General.DiskSpaceWarning

• Default: 500 M
• Shareaza geeft een waarschuwing bij als er minder dan deze hoeveelheid vrije ruimte is.

General.HashIntegrity

• Default: 1 (True)

General.IgnoreXPsp2

• Default: 0 (False)
• Deze instelling heeft alleen effect als je een besturingssysteem hebt met een half open connectie limiet (WinXP SP2 en later). Indien 'true zal Shareaza handelen alsof deze limiet niet bestaat. Shareaza kan met deze instelling sneller connecties maken. Doe deze wijziging alleen als je je Windows systeem (tcpip.sys) al aangepast hebt!. Als je de patch niet al gedaan hebt, dan krijg je problemen met surfen en ander gebruik van internet.

General.LanguageRTL

• Default: 0 (False)
• Inschakelen ondersteuning voor rechts-naar-links talen (Hebreeuws, Arabisch, ...).

General.LogLevel

• Default: 3 level
• Instellen log level van Systeemvenster. Mogelijke waarden: 0 - Error; 1 - Warning; 2 - Notice; 3 - Info; 4 - Debug

General.MaxDebugLogSize

• Default: 10 MB
• Instellen maximale grootte van debug logfile. Zie General.DebugLog.

General.MinTransfersRest

• Default: 50 ms (defaulted to 15 before 8866 )

General.RatesInBytes

• Default: 1 (True)
• Sets whether the transfer rates are shown in Bytes per second (B/s) or in Bits per second (b/s). Remember: One byte is 8 bits, so 8kb/s = 1KB/s.

General.SearchLog

• Default: 1 (True)

General.ShowTimestamp

• Default: 1 (True)
• Enables/disables the timestamp in the System Window.

General.SizeLists

• Default: 0 (False)

General.TrayMinimize

• Default: 0 (False)
• If set to True, Shareaza will go to the tray area when minimized.

Gnutella

This section pertains to settings used with gnutella and G2 and their file transfers only.

Gnutella.ConnectFactor

• Default: 4x
• Defines the aggressiveness with which Shareaza connects to the Gnutella networks. This number is multiplied by the number of desired host connections which are not yet filled to provide the number of hosts to try at a time while attempting to connect to the Gnutella networks. The connections are performed independent of one another, and are neither FIFO nor LIFO in nature. Rather, as soon as a slot is available, another connection is attempted unless the desired number of connections have been reached, in which case the extra connections are dropped.

Gnutella.ConnectThrottle

• Default: 30 s

Gnutella.DeflateHub2Hub

• Default: 1 (True)

Gnutella.DeflateHub2Leaf

• Default: 1 (True)

Gnutella.DeflateLeaf2Hub

• Default: 0 (False)

Gnutella.HitsPerPacket

• Default: 64
• Defines the maximum number of results to return to a single query from a remote host, no matter how many entries in the local library match the query. This setting is designed to avoid flooding a host with all possible matches, instead returning a random set with each query. It also saves processing time on the local host because the search can bail out when it reaches the specified number of results.

Gnutella.HostCacheSize

• Default: 1024 hosts
• Defines the maximum number of hosts to keep in the Gnutella Host Cache. The oldest or least accessed hosts are dropped from the list when new ones are added.

Gnutella.MaxHits

• Default: 64 files
• See Gnutella.HitsPerPacket.

Gnutella.MaximumPacket

• Default: 64 KB

Gnutella.MaxResults

• Default: 150 hits

Gnutella.RouteCache

• Default: 10 m
• Defines the timeout period before a route in the route cache is dropped if it has not been accessed in the specified time.

Gnutella.SpecifyProtocol

• Default: 1 (True)

Gnutella1

This section pertains to settings used to configure the original gnutella network and gnutella file transfers only.

Gnutella1.ClientMode

• Default: 1

Gnutella1.DefaultTTL

• Default: 3
• Defines the default Time-To-Live (TTL) of outgoing gnutella packets.

Gnutella1.EnableAlways

• Default: 1 (True)
• If set to True, Shareaza will connect to gnutella on every session.

Gnutella1.EnableGGEP

• Default: 1 (True)
• If true, Shareaza utilizes the Gnutella Generic Extension Protocol when interfacing with gnutella.

Gnutella1.EnableOOB

• Default: 0 (False)

Gnutella1.HostCount

• Default: 15

Gnutella1.HostExpire

• Default: 2 d (2 days)
• Removes older gnutella ultrapeers that may not be up anymore.

Gnutella1.MaxHostsInPongs

• Default: 10

Gnutella1.MaximumQuery

• Default: 256

Gnutella1.MaximumTTL

• Default: 10
• Defines the maximum Time-To-Live (TTL) Shareaza will allow forwarded gnutella messages to contain.

Gnutella1.NumHubs

• Default: 3
• Sets the number of gnutella ultrapeers Shareaza connects to when connecting to the original gnutella network.

Gnutella1.NumLeafs

• Default: 50
• Sets the number of leafs Shareaza accepts when running in ultrapeer mode. Note that ultrapeer mode is disabled on recent versions of Shareaza.

Gnutella1.NumPeers

• Default: 32
• Sets the number of peers Shareaza connects to when running in ultrapeer mode. Note that Ultrapeer mode is disabled on recent versions of Shareaza.

Gnutella1.PacketBufferSize

• Default: 64 packets
• Defines the number of packets Shareaza will reserve space for in the packet buffer. Larger numbers may allow Shareaza to drop less overall packets in cases where network packets are seen to surge and wane regularly.

Gnutella1.PacketBufferTime

• Default: 60 s
• Defines the maximum amount of time Shareaza will wait before discarding a packet in the packet buffer if it has not yet been processed. Raising this timeout will give packets more time to be processed, lowering it will discard them more quickly.

Gnutella1.PingFlood

• Default: 3 s
• Defines the minimum allowed time between pings from a remote host before Shareaza ignores the host as a ping flood. Raising this limit may ignore hosts that are not actually flooding, while lowering it may not catch enough ping flooders.

Gnutella1.PingRate

• Default: 30 s

Gnutella1.PongCache

• Default: 10 s
• Defines the maximum amount of time Shareaza will wait before discarding a pong in the pong cache if it has not yet been processed.

Gnutella1.PongCount

• Default: 10

Gnutella1.QueryHitUTF8

• Default: 1 (True)

Gnutella1.QuerySearchUTF8

• Default: 1 (True)

Gnutella1.QueryThrottle

• Default: 30 s
• Defines the amount of time Shareaza will wait before sending another query to a specific connected gnutella client. Lower values will send queries more often, higher values will send queries less often. It is generally accepted to keep the value above 20 minutes to avoid flooding the network with query traffic. (This is a global throttle which controls all queries to a specific connected client.)

Gnutella1.RequeryDelay

• Default: 30 s
• Defines the amount of time Shareaza will wait before sending the same query again. Lower values will send queries more often, higher values will send queries less often. It is generally accepted to keep the value above 45 minutes to avoid flooding the network with query traffic. (This is a search-specific throttle which affects the retransmission of that query to any connected clients.)

Gnutella1.SearchTTL

• Default: 4
• Defines the Time-To-Live (TTL) of outgoing search packets on the gnutella network.

Gnutella1.StrictPackets

• Default: 0 (False)

Gnutella1.TranslateTTL

• Default: 2

Gnutella1.VendorMsg

• Default: 1 (True)
• If true, Shareaza displays Vendor Messages with or in place of HTTP status codes.

Gnutella2

This section pertains to settings used with the Gnutella2 (G2) network and Gnutella2 file transfers only.

Gnutella2.EnableAlways

• Default: 1 (True)
• Sets whether or not Gnutella2 will always be enabled.

Gnutella2.HAWPeriod

• Default: 300 s

Gnutella2.HostCount

• Default: 15

Gnutella2.HostCurrent

• Default: 10 m (minutes)
• Shareaza queries only hosts that have been recently seen.

Gnutella2.HostExpire

• Default: 2 d (days)
• Sets the time G2 hosts remain stored in the Host Cache. Zero indicates that the Hubs in the Host Cache shall not expire.

Gnutella2.HubHorizonSize

• Default: 128

Gnutella2.HubVerified

• Default: 0 (False)

Gnutella2.KHLHubCount

• Default: 50
• Defines the number of hubs that Shareaza will cache in the G2 Host Cache.

Gnutella2.KHLPeriod

• Default: 60 s
• Defines the timeout period before sending out the next KHL.

Gnutella2.LNIPeriod

• Default: 60 s

Gnutella2.NumHubs

• Default: 2
• Maximum: 3
• Sets the number of Hubs to connect to when running in Leaf Mode. Its default value (2) should be largely sufficient for everyone. People with very unstable connections can also choose 3 for a more secure connection, however this is not needed for 99% of all users.

Gnutella2.NumLeafs

• Default: 300
• Maximum: 1024
• This setting sets the amount of leafs slots when running in Hub Mode. Its value is changed on first run dependent on your Internet connection speed.

Gnutella2.NumPeers

• Default: 6
• Maximum: 64
• This setting sets the amount of Peer to Peer connections when running in Hub Mode. Its value can be set to 64 for special purposes, however setting it to more than 1/40 of the Gnutella2.NumLeafs is considered as being bad for the network. It's default setting should be good for everyone.

Gnutella2.PingRate

• Default: 15 s

Gnutella2.PingRelayLimit

• Default: 10
• Maximum: 30
• Used when running in Hub Mode only. Defines the maximum number of neighboring nodes to send a ping relay marker to.

Gnutella2.QueryGlobalThrottle

• Default: 125 ms
• Defines the amount of time Shareaza will wait before sending another query to any connected Gnutella 2 clients. Lower values will send queries more often, higher values will send queries less often. While the G2 protocol is much less sensetive to the drawbacks of searching, it is generally accepted to keep the value above 200 milliseconds to avoid flooding any connected hosts with query traffic. (This is a global throttle which controls all queries to all connected clients.)

Gnutella2.QueryHostDeadline

• Default: 600 s

Gnutella2.QueryHostThrottle

• Default: 120 s
• Defines the amount of time Shareaza will wait before sending another query to the same host. Lower values will send queries more often, higher values will send queries less often. It is generally accepted to keep the value above 120 seconds to avoid flooding a host with query traffic. (This is a global throttle which controls all queries to a specific connected client.)

Gnutella2.QueryLimit

• Default: 2400

Gnutella2.RequeryDelay

• Default: 4 h
• Defines the amount of time Shareaza will wait before automatically sending an active search.

Gnutella2.UdpBuffers

• Default: 512
• Defines the number of slots allocated for incoming and outgoing UDP packets in the UDP packet buffer. Larger numbers may allow Shareaza to drop less overall UDP packets in cases where network packets are seen to surge and wane regularly.

Gnutella2.UdpGlobalThrottle

• Default: 1

Gnutella2.UdpInExpire

• Default: 30 s
• Defines the maximum amount of time Shareaza will wait before discarding a packet in the incoming UDP packet buffer if it has not yet been processed. Raising this timeout will give packets more time to be processed, lowering it will discard them more quickly.

Gnutella2.UdpInFrames

• Default: 256

Gnutella2.UdpMTU

• Default: 500
• Defines the Maximum Transmission Unit (MTU) size for UDP packets. 500 is the recommended value for best compatibility with ATM switched networks which carry traffic on the Internet in-between the source and destination hosts.

Gnutella2.UdpOutExpire

• Default: 26 s
• Defines the maximum amount of time Shareaza will wait before discarding a packet in the outgoing UDP packet buffer if it has not yet been processed. Raising this timeout will give packets more time to be processed, lowering it will discard them more quickly. Setting this value too low will drop packets on slower connections.

Gnutella2.UdpOutFrames

• Default: 256

Gnutella2.UdpOutResend

• Default: 6 s
• Defines the amount of time Shareaza will wait before resending the last UDP transmission if it does not receive an expected acknowledgement from the remote host.

Interface

Interface.LowResMode

• Default: 0 (False)
• Allows users with very little or low-resolution screens to see menus and options (GUI).

Interface.TipAlpha

• Default: 230

Interface.TipDelay

• Default: 600 ms

Interface.TipDownloads

• Default: 1 (True)

Interface.TipLibrary

• Default: 1 (True)

Interface.TipMedia

• Default: 1 (True)

Interface.TipNeighbours

• Default: 1 (True)

Interface.TipSearch

• Default: 1 (True)

Interface.TipUploads

• Default: 1 (True)

IRC

This section sets the options to configure Shareazas IRC support.

IRC.FloodEnable

• Default: 1 (True)

IRC.Show

• Default: 1 (True)

IRC.Timestamp

• Default: 0 (False)
• Enables/disables the time stamp preceding messages in the IRC chat window.

IRC.Updated

• Default: 0 (False)

Library

This section configures the behavior of items in the Shareaza Library system.

Library.CreateGhosts

• Default: 1 (True)
• Enables/disables the creation of ghost files on file deletion. This is needed if you wish Shareaza to remember already deleted files as well as the meta data and comments you made about them. It is not recommended to disable this setting as disabling it means that bad file ratings (for example if a file contains a virus) do not spread among the network without ghost files.

Library.HashWindow

• Default: 1 (True)
• If enabled, a little pop-up window is shown near the system tray indicating Shareaza is hashing files. Has been disabled by default in the past because of a display bug that triggered an error message on Win2k. This bug has been fixed on v2.5.0.0.

Library.HighPriorityHash

• Default: 0 (False)
• Enables/disables high priority hashing. High priority hashing is faster than normal hashing, but consumes more computer resources than normal hashing. Depending on the hardware of your PC, this can make it lag, stop responding or even crash, however, on modern PCs, this shouldn't cause problems anymore.

Library.HighPriorityHashing

• Default: 20 MB/s
• Defines how quickly Shareaza hashes files when high priority (fast) hashing has been enabled. See Library.HighPriorityHash.

Library.HistoryDays

• Default: 3 days
• Sets the number of days a newly downloaded file is shown in the recently downloaded files list on the first page of the Library Manager.

Library.HistoryTotal

• Default: 32 files
• Sets the number of files shown in the recently downloaded files list on the first page of the Library Manager. Once this limit is reached, the oldest entry is removed from the list.

Library.LowPriorityHashing

• Default: 2 MB/s
• Sets how quickly files are hashed when slower hashing is chosen in the library settings. See also Library.HighPriorityHash.

Library.MarkFileAsDownloaded

• Default: 1 (True)

Library.MaxMaliciousFileSize

• Default: 1024 Bytes
• Warn users when there are more than 4 duplicates of files under this size in their library.

Library.PanelSize

• Default: 120 px
• Sets the size of the file details / recently downloaded files panel in the Library Manager.

Library.PreferAPETags

• Default: 1 (True)

Library.QueryRouteSize

• Default: 20
• This setting determines the size of the Query Routing Table which Shareaza sends to Hubs and ultrapeers. The size is measured as 2{{box|x bits, so 2}}20 is a table 1,048,576 bits (or 131,072 bytes) large. The larger the table, the fewer queries you will receive for files you do not have, however you will have to upload and maintain the table for every Hub and ultrapeer you connect with. 2{{box|20 is recommended as a good balance.

Library.ScanAPE

• Default: 1 (True)

Library.ScanASF

• Default: 1 (True)

Library.ScanAVI

• Default: 1 (True)

Library.ScanCHM

• Default: 1 (True)

Library.ScanEXE

• Default: 1 (True)

Library.ScanImage

• Default: 1 (True)

Library.ScanMP3

• Default: 1 (True)

Library.ScanMPC

• Default: 1 (True)

Library.ScanMPEG

• Default: 1 (True)

Library.ScanMSI

• Default: 1 (True)

Library.ScanOGG

• Default: 1 (True)

Library.ScanPDF

• Default: 1 (True)

Library.ShowCoverArt

• Default: 1 (True)

Library.ShowPanel

• Default: 1 (True)

Library.ShowVirtual

• Default: 1 (True)

Library.SmartSeriesDetection

• Default: 1 (True)
• Enables/disables parsing of file names in order to detect some common meta-data. e.g. "cool_film_s01e05.avi" would get "Title: cool film", "Season: 01" and "Episode: 05".

Library.SourceExpire

• Default: 1440 m
• Defines the amount of time for Shareaza to wait before discarding discovered alternate sources for files in the library.

Library.SourceMesh

• Default: 1 (True)

Library.StoreViews

• Default: 1 (True)

Library.ThumbSize

• Default: 128 px
• Defines the square pixel size for thumbnails served to G2 clients who wish to view the remote thumbnail for a video or image file. Units are pixels of one edge of a square. Has been set from 96 to 128 on v2.5.0.0.

Library.TigerHeight

• Default: 9
• Defines the depth level of TigerTree hashing data provided by the local host to remote hosts wishing to verify files by Tiger-Tree Hashing. Larger numbers provide more detailed hashing data, but the data will take up more space on the disk and, thus, take longer to transfer to clients who request it. It is best not to change this setting.

Library.TreeSize

• Default: 200 px
• Defines the size (in pixels) of the folder tree on the left side of the Library Manager.

Library.UseCustomFolders

• Default: 1 (True)

Library.UseFolderGUID

• Default: 1 (True)

Library.VirtualFiles

• Default:0 (False)
• If true, Shareaza will omit the tags of .mp3 files when hashing these files in your library, and it will only advertise and share these virtual files with others. There are good reasons for setting this to false, to not to strip these metadata tags. After v2.1.0.0, this setting, previously configurable in the upload settings, was moved to the advanced settings.

Library.WatchFolders

• Default: 1 (True)
• Sets whether Shareaza watches the folders that are part of the library for changes. If set to false, Shareaza will not detect changes to the library made by other applications (e.g. when a file is deleted or modified).

Library.WatchFoldersTimeout

• Default: 5 s (seconds)

Media Player

Settings for Shareazas integrated Shareaza Media Player and support settings for external players.

MediaPlayer.EnableEnqueue

• Default: 1 (True)

MediaPlayer.EnablePlay

• Default: 1 (True)

MediaPlayer.ListVisible

• Default: 1 (True)

MediaPlayer.Random

• Default: 0 (False)

MediaPlayer.Repeat

• Default: 0 (False)

MediaPlayer.ShortPaths

• Default: 0 (False)
• Some players cannot handle Unicode path names, but do work when given DOS file names (8.3 file names). This setting does only affect users who use external players instead of the built-in plugin.

MediaPlayer.StatusVisible

• Default: 1 (True)

Remote

These settings are used to set up Shareazas remote access.

Remote.Enable

• Default: 0 (False)
• Shareazas Remote Access is disabled by default. It can be used to control Shareaza from a remote computer. To use this feature, FAQ.FirewallsRouters/nl#Wat is poortforwarding? has be be set up correctly.

Scheduler

These settings are used to control Shareazas built-in scheduler

Scheduler.AllowHub

• Default: 1 (True)

Scheduler.Enable

• Default: 0 (False)

Scheduler.LimitedBandwidth

• Default: 50%

Scheduler.LimitedNetworks

• Default: 1 (True)

Search

These options configure the behavior of searches and search results at the application layer.

Search.AdultFilter

• Default: 0 (False)
• Enables/disables the adult filter. To add/remove filter words, modify the AdultFilter.dat file in your Shareaza Data folder with any normal text editor.

Search.AdvancedPanel

• Default: 1 (True)
• Enables/disables displaying of the advanced panel in the Search Window, which allows you to choose the networks to search as well as the desired file size. The result details are also enabled/disabled with this setting.

Search.AutoPreview

• Default: 1 (True)

Search.ClearPreviews

• Default: 0 (False)

Search.DetailPanelVisible

• Default: 1 (True)
• Sets whether the advanced file information panel which shows for example preview images, extended meta data or user ratings is visible by default when opening a new Search Window/Tab.

Search.ExpandMatches

• Default: 0 (False)

Search.GeneralThrottle

• Default: 200 ms
• Represents the minimum time, in milliseconds, of delay between the same search requests to prevent hub/server hammering.

Search.HideSearchPanel

• Default: 0 (False)
• Enables/disables auto-hiding of the search panel on search start.

Search.HighlightNew

• Default: 1 (True)
• When conducting a new search while still retaining the display of old results, Shareaza will hightlight new search results for some seconds.

Search.MaxPreviewLength

• Default: 20 KB
• Defines the maximum allowable size for preview images served to remote hosts when they request a preview thumbnail.

Search.MonitorQueue

• Default: 128
• Defines the maximum number of searches to display in the scrolling search monitor. This list behaves in a FIFO manner.

Search.SanityCheck

• Default: 1 (True)

Search.SchemaTypes

• Default: 1 (True)
• If true, search results are filtered based on file extensions defined in schemas, if schemas are not available. This setting is dubious, at least it should allow to organize newly downloaded files in the Library based on the extension.

Search.SearchPanel

• Default: 1 (True)
• If set to 0 (False), Shareaza will show a small pop-up box to specify search terms and preferences instead of opening the search window directly. Once a search has been started, the search panel does not show in the search window by default.

Search.ShowNames

• Default: 1 (True)
• If true, Shareaza displays detected client names of hosts in search results instead of their IP addresses. The IP addresses can still be seen by hovering over the host to see the popup tooltip window. If false, the search window will not show the nicks of the clients that come up in a search, but show their ip address. This is useful to detect spam results.

Search.SpamFilterThreshold

• Default: 20%
• Percentage of hits with spam characteristics needed to trigger a file to be seen as suspicious.

Search.SwitchToTransfers

• Default: 1 (True)
• Once a file has been selected to download, Shareaza automatically switches to the Transfers/Downloads Window, where the file can now be seen.

Toolbars

Toolbars.ShowMonitor

• Default: 1 (True)
• Shows/hides the little bandwidth monitor in the title bar.

Toolbars.ShowRemote

• Default: 1 (True)
• Enables/disables Shareazas Remote Control tool bar.

Uploads

Met deze instellingen wordt ingesteld hoe Shareaza uploads verwerkt en aanvragen voor bestandsoverdracht van andere hosts afhandeld.

Uploads.AllowBackwards Default: 1 (True) Indien true, dan mag Shareaza de data in omgekeerde volgorde versturen en ook uploaden naar bronnen die de data in omgekeerde volgorde willen ontvangen.

Uploads.AutoClear Default: 0 (False) Indien false, Shareaza bewaard in een lijst de afgeronde uploads (wel met een maximum aantal).

Uploads.ClampdownFactor Default: 20% Het percentage van de totale uploadlimiet gereserveerd voor elk upload slot (berekend van gemiddelde of maximum, afhankelijk van de instelling).

Uploads.ClampdownFloor Default: 8 Kb/s Definieert hoeveel snelheid een slot moet ondersteunen voordat er een ander slot wordt geopend. Dus als je het op 8kb/s (1KB/s) zet, dan betekent dat, dat als er iemand van jou download LANGZAMER dan 1KB/s of 8kb/s er een ander slot wordt geopend en Shareaza blijft dit doen totdat al je slots geopend zijn.

Uploads.ClearDelay Default: 30 s Definieert hoeveel tijd Shareaza wacht voordat het een afgeronde of inactieve upload van het scherm wist als de "AutoClear" optie is aangevinkt in het contextmenu van het Uploads venster van de tab Transfers. Deze optie heeft geen invloed op het uploaden.

Uploads.DynamicPreviews Default: 1 (True)

Uploads.FreeBandwidthFactor Default: 15% Percentage vandbreedte dat beschikbaar moet zijn voordat er een nieuwe upload slot wordt geopend. Hangt samen met Uploads.FreeBandwidthValue. Shareaza gebruikt de conditie die het eerste geldig (true) wordt.

Uploads.FreeBandwidthValue Default: 20 Kb/s Absolute waarde van de bandbreedte die beschikbaar moet zijn voordat er een nieuw upload slot wordt geopend. Hangt samen met Uploads.FreeBandwidthFactor. Shareaza gebruikt de conditie die het eerste geldig (true) wordt.

Uploads.PreviewQuality Default: 40% Defines the quality of preview images served to remote hosts who request a preview thumbnail for an image or video file. Lower numbers will yeild smaller file sizes and faster transfers, but less detailed images.

Uploads.PreviewTransfers Default: 3 Defines the maximum number of transfers allocated for preview images served to remote hosts who request a preview thumbnail for an image or video file. Raising this number will allow more users to download preview thumbnails at once, but will increase the potential bandwidth usage as a result. The same setting is used to limit Library browsing at the same time.

Uploads.QueuePollMax Default: 120 s Defines the maximum amount of time Shareaza will wait before dropping a queued remote host if it has not sent another file transfer request while waiting in a queue line. Setting this to larger values may keep queue positions open longer than necessary in most cases. Setting it to smaller values may not give hosts enough time to resend file transfer requests and may unnecessarily drop hosts from the queue line.

Uploads.QueuePollMin Default: 45 s Defines the minimum amount of time remote hosts must wait before sending a queued file transfer request without being dropped from the queue line. This value gets smaller and smaller as the remote host moves to the front of the queue, governed by the local host. Setting this to smaller values will allow remote hosts to query for their queue positions more often, but use more bandwidth. Setting it to larger values will force remote hosts to wait longer before querying for queue positions or they will be dropped from the queue. This value may not exceed Uploads.QueuePollMax.

Uploads.RewardQueuePercentage Default: 10%

Uploads.RotateChunkLimit Default: 1024 KB This setting will ensure that a user you are uploading to finishes a chunk before you stop uploading to rotate to the next user. This allows the other user to verify that chunk and, in turn, share the chunk through partial file sharing. Changing this setting is not recommended.